Fujitsu Eternus DX100 S3 User Manual page 526

Chapter 5 System Settings and Display
5.2 Network Management > create snmp-user
-encryption-method
■
Example(s)
The following example creates the MIB user named "snmpuser1" with view "view13":
CLI> create snmp-user -name snmpuser1 -view view13
Authentication Password:
Confirm Authentication Password:
Encryption Password:
Confirm Encryption Password:
The following example creates the MIB user name "FooVar" with view "xview4" and authentication is
disabled:
CLI> create snmp-user -name FooVar -view xview4 -authentication disable
The following example creates the SNMP user name "FooUser" without specifying a view name:
CLI> create snmp-user -name FooUser -view ""
Optional. This parameter specifies the encryption method. If this parameter is omitted, the
DES method is used as the encryption method.
This parameter can only be specified when the encryption function is enabled.
des DES encryption method (Default)
aes AES encryption method (Default)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
526
P2X0-1210-05ENZ0