Fujitsu Eternus DX100 S3 User Manual page 108

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volumes
-mode
Output
Volume
Status
Type
Usage Details
Optional. This parameter toggles the extended output mode. If the mode is omitted, "default"
is set.
Only one parameter can be specified.
When the "-mode expansion", "-mode uid" or "-mode wsv" parameter is specified, other
parameters cannot be specified at the same time.
detail
Detailed information of the volume can be displayed.
expansion
Detailed information of the configuration of an expanded volume (LUN
concatenation volume) can be displayed. Only LUN concatenation volumes are
displayed.
uid
NAA identifiers (UIDs) are displayed. All types of volumes are displayed.
wsv
The information for the concatenated RAID groups of the WSV is displayed. Only
WSVs are displayed.
ftv
The usage status of the FTSPs for the FTV is displayed.
The FTSPs are listed in the following order according to disk type; SSDs, SEDs,
Nearline disks, and then Online disks. This option can be specified together with
the "-ftsp-number" parameter or the "-ftsp-name" parameter. "Used Capacity"
indicates the total used capacity for the FTSPs. "Volume Used Capacity" indicates
the used capacity for the FTSPs of an FTV. "Usage Rate" indicates (Volume Used
Capacity)/(total capacity of all the FTVs)  100. The result for this formula is
rounded down to the nearest whole number. This may result in the sum of the
displayed "Usage Rate" values not being 100% even when the actual value is
100%. When no FTSPs are used, the "Usage Rate" is 0%. This information is only
displayed for FTVs.
tfo
A summary of the volumes that belong to the TFO Group can be displayed.
default
The same result as when this parameter is omitted.
Volume identifiers
No.
Volume number
Name
Volume name
Volume status
Volume type and volume usage
(This information appears when the NAS function is enabled.)
Detailed volume usage
(This information appears when the NAS function is enabled.)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
108
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents