Show Migration - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show migration

show migration

This command displays a list of the migrating volumes that are undergoing migration.
This command is also used for RAID Migration in which the destination is a Flexible Tier Pool (FTRP).
■ Syntax
show migration
■ Parameter
No parameters.
■
Output
Migration Source Volume
Migration Status
Progress
Error Code
Work Volume No.
■
Example(s)
The following example displays a list of all migrating volumes:
CLI> show migration
Migration Source Volume
No. Name
----- -------------------------------- --------- -------- ----- -----------
- -
1 Volume-Number#01
2 Volume-Number#02
3 Volume-Number#03
Migration source volume identifiers
No. Migration source volume number
Name Migration source volume name
Volume migration status
Volume migration progress
Volume migration error code (for details, refer to
Working volume number (In order to be used as a migration destination)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"A.2.1 Copy Session Error Codes" (page
Migration Progress Error Work Volume
Status Code
Reserve -
Error 20% 0x16
Suspend 10% 0x1c
Active 90% 0x00
133
No.
- -
5
6
4
P2X0-1210-05ENZ0
881))