User Management; Role - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display

5.1 User Management

5.1 User Management
This section explains the commands that manage a user account and a password.
5.1.1

Role

Roles define the user roles and the policies based on the definitions that are assigned to each role. Policies
are given to users as roles. There are default roles that are preset in the ETERNUS DX and user-defined roles
(custom roles). The following table shows the roles and their policies.
■
Default roles
The default roles and corresponding policies are shown in the following table.
User policy
Status Display
RAID Group Management
Volume - Create / Modify
Volume - Delete / Format
Host Interface Management
Advanced Copy Management
Copy Session Management
Storage Management
User Management
Authentication / Role
Security Setting
Maintenance Information
Maintenance Operation
Software Control
Firmware Management
NAS Management
*1: A role that is dedicated for external software. This role enables external software to access CLI.
■
Custom roles
Create custom roles when an operation cannot be performed with only the default roles.
Multiple user policies can be assigned to a single custom role.
For details on creating and setting up a custom role, refer to the "create role" and " set role" commands.
Storage
Monitor Admin
Admin
Yes Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes
467
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Default role
Account Security
Maintainer
Admin Admin
Yes Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
Yes
Yes
Software
(*1)
Yes
P2X0-1210-05ENZ0