Forced Nas-Fslock - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.10 NAS Function Restoration > forced nas-fslock

forced nas-fslock

This command locks or unlocks the writing process for the file system.
■
Syntax
forced nas-fslock -mode {lock|unlock}
{-volume-number
■ Parameter
-mode
-volume-number
or
-volume-name
■ Example(s)
This command locks the writing process for NAS TPV#1.
CLI> forced nas-fslock -mode lock -volume-number 1
This command unlocks the writing process for NAS_TPV (NAS Backup TPV).
CLI> forced nas-fslock -mode unlock -volume-name NAS_TPV
volume-number
|-volume-name
This parameter specifies the locks or unlocks of the writing process.
lock Locks the writing process.
unlock Unlocks the writing process.
This parameter specifies the target NAS TPV. Only a single volume can be specified.
• Only NAS TPVs can be specified.
• If the specified volume is unmounted, this command terminates with an error.
volume-number
Volume number
volume-name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume-name
}
818
P2X0-1210-05ENZ0