Fujitsu Eternus DX100 S3 User Manual page 851

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
E8110
E8800
E8801
E8802
E8803
E9000
E9001
E9002
E9003
E9004
E9200
E9201
E9202
E9203
E9204
E9205
E9206
E9207
E9208
E9209
The file is incorrect.
The file is incorrect.
The connection to the FTP server failed.
The connection to the FTP server failed.
Reading data from the FTP server failed.
Reading data from the FTP server failed.
Writing data from the FTP server failed.
Writing data from the FTP server failed.
Setting a route to the external server failed.
Setting a route to the external server failed.
The device model does not support the command.
The ETERNUS DX model does not support the command.
The command cannot be executed because the ETERNUS DX is in "Not Ready" status.
The command cannot be executed because the ETERNUS DX is in Not Ready status.
The storage cluster license is not registered.
The Storage Cluster license is not registered.
The storage cluster license is already registered.
The Storage Cluster license is already registered.
The copy license and storage cluster license is not registered.
Both the copy license and the Storage Cluster license are not registered.
The Extreme Cache function is not enabled.
The Extreme Cache function is not enabled for the ETERNUS DX.
The Flexible Tier mode is enabled.
The Flexible Tier mode is enabled. Disable the Flexible Tier mode.
The Thin Provisioning allocation mode is TPV balancing.
The Thin Provisioning allocation mode is TPV balancing. Change the Thin Provisioning allocation mode to
TPP balancing.
Disk Patrol is disabled.
Disk Patrol is disabled.
The device contains pinned data.
The ETERNUS DX contains pinned data.
The command cannot be executed because the network setting is the factory default setting.
The command cannot be executed because the network setting is the factory default setting.
The Extreme Cache function is enabled.
The Extreme Cache function is enabled.
The operation mode is not "Maintenance Mode".
The operation mode is not Maintenance Mode.
SMI-S server is already enabled.
The SMI-S function is enabled.
SMI-S server is already disabled.
The SMI-S function is disabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
851
P2X0-1210-05ENZ0