Fujitsu Eternus DX100 S3 User Manual page 129

Chapter 3 Configuration Settings and Display
3.2 Volume Management > delete all-volumes
-pool-number
or
-pool-name
■ Example(s)
The following example deletes all the volumes contained in the RAID group named "RGP001":
CLI> delete all-volumes -rg-name RGP001
The following example deletes all the volumes contained in the Thin Provisioning Pool named "TPP001":
CLI> delete all-volumes -pool-name TPP001
This parameter specifies the Thin Provisioning Pool identifiers to delete all the volumes
contained in the Thin Provisioning Pools. Only one Thin Provisioning Pool can be specified at
the same time. For details, refer to
• This parameter cannot be specified with the "-rg-number" or the "-rg-name" parameter.
• When it is necessary to delete NAS system volumes, it is essential to operate under the
Maintenance Operation policy.
pool_number
Thin Provisioning Pool number
pool_name Thin Provisioning Pool name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.6 Thin Provisioning Pool Syntax" (page
129
23).
P2X0-1210-05ENZ0