Fujitsu Eternus DX100 S3 User Manual page 175

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management
4
Thin Provisioning Volume (TPV) management
Prepare a TPP and a TPV. A TPV can be created from a TPP. A TPV can be created in the same way as a
normal volume is created by using the "create volume" command. It can be deleted using the "delete
volume" command. When expanding a volume, use the "expand volume" command.
• A TPV can be deleted by using the "delete volume" command.
• A TPV can be expanded by using the "expand volume" command.
The following figure shows the relationship between TPPs and TPVs:
TPP
create thin-pro-pool
(Create TPP)
TPV
create volume
(Create TPV)
show thin-pro-pools
(Show TPP)
delete thin-pro-pool
(Delete TPP)
175
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
End of procedure
P2X0-1210-05ENZ0