Fujitsu Eternus DX100 S3 User Manual page 416

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show advanced-copy-sessions
■ Output
When all parameters are omitted:
Number of EC Sessions
Number of OPC Sessions
Number of QuickOPC Sessions
Number of SnapOPC Sessions
Number of SnapOPC+ Sessions
Number of Monitor Sessions
Number of REC Sessions
Number of XCopy Sessions
Number of ODX Sessions
When a list is displayed:
SID
Generation
Type
Volume Type
Source Volume
Number of the Advanced Copy type EC sessions
Number of the Advanced Copy type OPC sessions
Number of the Advanced Copy type QuickOPC sessions
Number of the Advanced Copy type SnapOPC sessions
Number of the Advanced Copy type SnapOPC+ sessions
Number of the Advanced Copy type Monitor sessions
Number of the Advanced Copy type Remote Equivalent Copy (REC) sessions
Number of the Advanced Copy type XCOPY sessions
Number of the Advanced Copy type ODX sessions
Session ID of this system is displayed in decimal number
The generation is displayed only when the SnapOPC+ type is selected.
Advanced Copy type (EC, OPC, QuickOPC, SnapOPC, SnapOPC+, Monitor, REC, ODX, or
XCOPY) is displayed.
Volume type that is to be copied in the session
Copy source volume identifiers
No. Copy source volume number
Name Copy source volume name
416
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0