Fujitsu Eternus DX100 S3 User Manual page 829

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
E0050
E0051
E0052
E0053
E0060
E0061
E0070
E0071
E0072
E0073
E0080
E0081
E0089
E0090
Incorrect file.
The specified file format is incorrect. Check the format of the file identified in the details of this message.
Incorrect license key.
The specified license key is incorrect. Check the license key shown in the details of this message.
File access failure.
Unable to access the specified file. Possible causes include file restrictions, directory restrictions or a lack
of free space when creating a file.
Remote server access failure.
This message indicates that the email notification cannot access the SMTP server. Use the "show network"
command to check the remote server environment and the network environment. Use the "show email-
notification" command to check the email notification settings.
Resource locked.
The resource is being used by another session. Wait for a while and retry the command. If this error
message continues to recur even after numerous command retries, a resource can be forcibly released by
using the "set clienv-force-unlock" command (do not use this command while settings are being
performed by another session of Web GUI, CLI, or monitoring software).
Lock was relinquished to another user.
The process privilege is taken by another user (GUI, CLI, or monitoring software). Wait for a while and try
again.
Resource busy.
Resources corresponding to the specified parameter are used by another process. Check the working
status of the resources identified in the details of this message.
Resource is linked to the other resource.
The specified parameter is associated with other resources. Confirm the associated status of the specified
parameter (Example: host mappings, ECO definitions, etc.).
Release the association if necessary and try again. For example, host mappings can be released by using
the "release host-affinity" command and/or the "release mapping" command, and Eco-mode definitions
can be deleted by using the "release eco-raid-group" command.
Resource is temporarily insufficient.
Could not execute because the required resource is temporarily insufficient. Wait for a while and retry the
command.
Drive is currently Busy. Wait a while, and then retry.
A timeout occurred while performing an internal retry. Wait for a while and retry the command.
Resource limited.
A resource has reached its limit. Confirm the limit and the status of the specified parameter/function.
Number of active disks has reached the system limit.
Number of activated disks has reached the system limit (up to 120 disks can be used). Mixed
configurations that include both 3.5" and 2.5" type disks are allowed.
Not available under current Advanced Copy usable mode conditions.
The current Advanced Copy mode does not permit this operation. Use the "show advanced-copy-
parameters" command to check the Advanced Copy usable mode.
The Advanced Copy usable mode can be canceled by using the "set advanced-copy-parameters"
command if necessary.
Not available under current system status conditions.
The current system status does not permit this operation. Check the system status and the allowed
execution conditions for the operation.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
829
P2X0-1210-05ENZ0