Flexible Tier Sub Pool Syntax; Raid Group Syntax - Fujitsu Eternus DX100 S3 User Manual

Chapter 1 Overview
1.2 The Command Syntax
1.2.8

Flexible Tier Sub Pool Syntax

There are two methods for identifying an entered Flexible Tier Sub Pool; Flexible Tier Sub Pool numbers or
Flexible Tier Sub Pool names.
• Flexible Tier Sub Pool number
A Flexible Tier Sub Pool number is automatically created by the system when a Flexible Tier Sub Pool is
created. This is a decimal number. Flexible Tier Sub Pool numbers can be displayed by using the "show
flexible-tier-sub-pools" command.
Flexible Tier Sub Pool numbers can be combined as follows:
- A single Flexible Tier Sub Pool number: 1
- A list of Flexible Tier Sub Pool numbers: 1,8,12
- A hyphenated range of Flexible Tier Sub Pool numbers from
- A list of Flexible Tier Sub Pool numbers, ranges, or both, separated by commas (,): 1,3,10-12
• Flexible Tier Sub Pool name
A Flexible Tier Sub Pool name must be specified when creating a Flexible Tier Sub Pool. For details about
the syntax, refer to
of Flexible Tier Sub Pool names. A Flexible Tier Sub Pool name and a Flexible Tier Sub Pool number cannot
both be specified in the same command. Do not include spaces before or after commas (,).
• Two or more parameters might not be able to be specified for several commands. For details, refer to the
command descriptions.
• Since Thin Provisioning Pools and Flexible Tier Sub Pools use the same resource, the same number and
name cannot be used for both a Thin Provisioning Pool and a Flexible Tier Sub Pool. If the FTSP number or
FTSP name that is specified for a command is already used for a Thin Provisioning Pool, the command is
not executed.
1.2.9

RAID Group Syntax

There are two methods for specifying RAID group identifiers; RAID group numbers or RAID group names.
• RAID group number
A RAID group number is automatically created by the system when a RAID group is created. This is a
decimal number. RAID group numbers can be displayed by using the "show raid-groups" command.
RAID group numbers can be combined as follows:
- A single RAID group number: 1
- A list of RAID group numbers: 1,8,12
- A hyphenated range of RAID group numbers from
- A list of RAID group numbers, RAID group ranges, or both, separated by commas (,). Spaces are not
permitted before or after commas (,): 1,3,10-12
"1.2.5 Alias Name Syntax" (page
25
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
a
to z: 2-5
23). Some commands accept a comma-separated list
a
to z: 2-5
P2X0-1210-05ENZ0