Import Rec-Path - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > import rec-path

import rec-path

This command is used to import an REC path information file from a specified FTP server and apply it to a
system. Either type, TEXT or BINARY is available.
• For details, refer to
• If a TEXT type path information file has syntax errors, the number of the problem line is included with the
error message.
• This command may also be used to apply a GUI-created BINARY type path information file.
■ Syntax
import rec-path -port {maintenance | remote | fst} -server
-user login_user_account
■ Parameter
-port
-server
-user
-filename
"4.1.4 Remote Equivalent Copy Management" (page
-filename filename
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page 35)
maintenance
MNT port
remote RMT port
fst FST port
This parameter specifies the name of the FTP server that contains the REC path information
file. The server name format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully
qualified domain name.
Example: -server 192.168.1.20
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
login_user_account
User name
This parameter specifies the REC path information filename.
filename
Filename
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
[-indicator {enable | disable}]
440
422).
P2X0-1210-05ENZ0