Show Nas-Fsstat - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.9 File System Maintenance > show nas-fsstat

show nas-fsstat

This command displays the status information of the file system.
■
Syntax
show nas-fsstat {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
Message
volume-number
This parameter specifies the target NAS TPV. Only a single volume can be specified.
• If the specified volume does not exist or if the volumes are not NAS TPVs, no items are
displayed or "count 0" is displayed. In these cases, an error does not occur. However, if the
specified volume does not exist when the "-volume-name" parameter is specified, it causes
an error.
• If the specified volume is not mounted, this command terminates with an error.
volume-number
Volume number
volume-name
Volume name
This command displays the information of the file system.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume-name
|-volume-name
808
}
P2X0-1210-05ENZ0