Fujitsu Eternus DX100 S3 User Manual page 47

Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
BIOS Active EC
BIOS Next EC
CM EXP Active EC
CM EXP Next EC
NAS Engine Information
CM#n Internal Parts Status and Status Code (n: The controller module number)
Memory#
Memory# Parts Number
Memory# Serial Number
Memory# Hard Revision
BUD#
BUD# Parts Number
BUD# Serial Number
BUD# Hard Revision
CM FAN
CA# Parts Number
CA# Serial Number
CA# Hard Revision
EC number of the active firmware (The current operating firmware)
EC number of the stand-by firmware (The generation number of the firmware after the
next power cycle)
EC number of the active firmware (The current operating firmware)
EC number of the stand-by firmware (The generation number of the firmware after the
next power cycle)
This information only appears when the NAS function is enabled.
Status/Status Code
NAS function status and the status code
Memory status and the status code
Memory parts number
Memory serial number
Memory hardware revision
BUD (Bootup and Utility Device) status and the status code
BUD parts number
BUD serial number
BUD hardware revision
CM FAN status and the status code (ETERNUS DX500 S3/DX600 S3 only)
CA parts number
CA serial number
CA hardware revision
47
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0