Show Flexible-Tier-Pools - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > show flexible-tier-pools

show flexible-tier-pools

This command displays an overview list of Flexible Tier Pools (FTRPs) that are already registered in the
ETERNUS DX and detailed information for a specified FTRP. When the FTRP number or the FTRP name is
specified, information is displayed for the specified FTRP and the Flexible Tier Sub Pool (FTSP) that is
registered in the specified FTRP. When the FTRP number or the FTRP name is omitted, a list of the FTRPs that
are already registered in the ETERNUS DX is displayed.
■ Syntax
show flexible-tier-pools [-ftrp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■
Output
When the parameter is omitted:
Flexible Tier Pool
Status
Total Capacity
Used Capacity
Used Status
Warning(%)
Attention(%)
ftrp_number
Optional. This parameter specifies the FTRP identifier to display detailed information for.
Multiple parameters can be selected in a single command.
If omitted, a list of all the FTRPs that are already registered in the ETERNUS DX is displayed.
ftrp_number
FTRP number
ftrp_name
FTRP name
FTRP identifiers
No. FTRP number
Name FTRP name
FTRP status
Total capacity of the FTRP
Used capacity of the FTRP
Alarm status (Normal/Warning/Attention)
Warning level range
Attention level range
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftrp_name
| -ftrp-name
199
]
P2X0-1210-05ENZ0