Fujitsu Eternus DX100 S3 User Manual page 544

Chapter 5 System Settings and Display
5.2 Network Management > export enhanced-mib
-dir
-filename
■ Example(s)
The following example exports the enhanced MIB to the FTP server named "ftp.a.com". The FTP server login
is user "profile1", the stored location is "/temp", the default stored filename "/FJDARY-E150.MIB" is used, and
the Ethernet port that is used is the Maintenance port (MNT port).
CLI> export enhanced-mib -port maintenance -server ftp.a.com -user profile1 -dir /temp
Password :
exporting /temp/FJDARY-E150.MIB to ftp.a.com
Complete.
Optional. This parameter specifies the directory name on the FTP server where the MIB file is to
be stored. Since the file name cannot be specified within this string, use the "-filename"
parameter to specify the file name.
directory
Directory name
Optional. This parameter specifies the file name to store the MIB file. Since the directory name
cannot be specified within this string, use the "-dir" parameter to specify the directory name. If
this parameter is omitted, the default file name is "FJDARY-E150.MIB". If the file already exists,
it is overwritten.
filename
File name
The following conversion specifications, which begin with a percent character,
are replaced by their corresponding value at the time of execution. If other
conversion strings are specified, this command terminates abnormally with an
error message.
%s
%d
%t
%%
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Serial number of the system
Example: MIB%s-mib.bin -> MIB123456789012-mib.bin
Current date
Example: MIB%d-mib.bin -> MIB20080819-mib.bin
Current time
Example: MIB%t-mib.bin -> MIB144855-mib.bin
Percent character
Example: mib%%.bin -> mib%.bin
544
P2X0-1210-05ENZ0