Show Port-Groups - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show port-groups

show port-groups

This command displays a list of existing port groups.
■
Syntax
show port-groups
[-port-group-number
■ Parameter
-port-group-number
or
-port-group-name
or
-all
■ Output
When the parameter is omitted, a summary of all the existing port groups is displayed.
Port Group
CA Type
When the parameter is specified, the details of the specified port group are displayed.
Port Group
CA Type
port_group_numbers
Optional. This parameter specifies the port group identifiers that will be displayed in detail.
When the "-all" parameter is specified, the details of all the existing port groups are displayed.
One or more parameters can be specified. For details, refer to
30). If omitted, a summary of all the existing port groups will be displayed.
port_group_numbers
Port group number
port_group_names
Port group name
-all All the existing port groups
Port group identifiers
No. Port group number
Name Port group name
CA type
Port group identifiers
No. Port group number
Name Port group name
CA type
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
port_group_names
| -port-group-name
317
| -all]
"1.2.16 Port Group Syntax" (page
P2X0-1210-05ENZ0