Fujitsu Eternus DX100 S3 User Manual page 692

Chapter 6 Information Settings and Display
6.3 Maintenance Information > export config-information
-filename
-data
-indicator
■
Example(s)
The following example exports the latest configuration information to the FTP server named "ftp.a.com"
using the LAN port for operation management (MNT port). The user name for the FTP server is "profile1" and
the filename is "/tmp/config.cfg":
CLI> export config-information -port maintenance -server ftp.a.com -user profile1 -filename /tmp/config.cfg
-data latest
Password : (Operator inputs password, but it is hidden.)
exporting /tmp/config.cfg to ftp.a.com
complete.
The following example is the same as above, except that the progress indicator is not displayed:
CLI> export config-information -port maintenance -server ftp.a.com -user profile1 -filename /tmp/config.cfg
-data latest
-indicator disable
Password :
This parameter specifies configuration information filename to be stored. If the same filename
already exists, it is overwritten.
filename
Configuration information filename
The following conversion specifications, which begin with a percent character,
are replaced with their corresponding value at the time of execution. If other
conversion strings are specified, this command terminates abnormally with an
error message.
%s
%d
%t
%%
This parameter specifies which configuration information will be exported.
latest This parameter specifies the latest configuration information in the system.
one-before This parameter specifies the second-latest configuration information in the
system.
two-before This parameter specifies the third-latest configuration information in the system.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, this
function is enabled.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
(Operator inputs password, but it is hidden.)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Serial number of the system
Example:
/tmp/%s-log.bin -> /tmp/123456789012-log.bin
Current date
Example:
/tmp/%d-log.bin -> /tmp/20080819-log.bin
Current time
Example:
/tmp/%t-log.bin -> /tmp/144855-log.bin
Percent character
Example:
/tmp/log%%.bin -> /tmp/log%.bin
692
P2X0-1210-05ENZ0