Event Notification; Figure 42 Event Notification; Table 35 Levels And Contents Of Events That Are Notified - Fujitsu ETERNUS AF S3 Series Design Manual

2. Basic Functions
Operation Management/Device Monitoring

Event Notification

When an error occurs in the ETERNUS AF, the event notification function notifies the event information to the
administrator. The administrator can be informed that an error occurred without monitoring the screen all the
time.
The methods to notify an event are e-mail, SNMP Trap, syslog, remote support, and host sense.
Figure 42 Event Notification
Server (host)
The notification methods and levels can be set as required.
The following events are notified.
Table 35 Levels and Contents of Events That Are Notified
Level
Error
Warning
Notification (information)
●
E-Mail
When an event occurs, an e-mail is sent to the specified e-mail address.
The ETERNUS AF supports "AUTH SMTP" and "SMTP over SSL" as user authentication. A method can be
selected from CRAM-MD5, PLAIN, LOGIN, or AUTO which automatically selects one of these methods.
Mail SNMP
server manager
E-mail SNMP Trap
Host sense
ETERNUS AF
Level of importance
Maintenance is necessary
Preventive maintenance is
necessary
Storage system information
86
Syslog server
Syslog
REMCS/AIS Connect
Event contents
Component failure, temperature error, end of battery
life, rebuild/copyback, etc.
Module warning, battery life warning, etc.
Component restoration notification, user login/logout,
RAID creation/deletion, storage system power on/off,
firmware update, etc.
Remote
support
center
Design Guide