Page 1 P2X0-1260-19ENZ0 ETERNUS Web GUI User's Guide (Operation) FUJITSU Storage ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Disk Storage Systems, ETERNUS AF250/AF650, ETERNUS DX200F All-Flash Arrays...
Page 2 This page is intentionally left blank.
Page 3 Systems and Web GUI for the FUJITSU Storage ETERNUS AF250/AF650, ETERNUS DX200F All-Flash Arrays (hereinafter referred to as "ETERNUS Web GUI"). It should be used for reference when monitoring the FUJITSU Storage ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Disk Storage Systems, and the FUJITSU Storage ETERNUS AF250/AF650, ETERNUS DX200F All- Flash Arrays (hereinafter referred to as "ETERNUS DX/AF"...
Page 4 Related manuals (*1) for this manual are listed below. • FUJITSU Storage ETERNUS DX60 S3 Disk Storage Systems Overview • FUJITSU Storage ETERNUS DX60 S3 Disk Storage Systems Site Planning Guide • FUJITSU Storage ETERNUS DX60 S3 Disk Storage Systems Design Guide (Basic) •...
Page 5 FUJITSU Storage ETERNUS DX200F All-Flash Arrays Configuration Guide (Basic) • FUJITSU Storage ETERNUS DX200F All-Flash Arrays Operation Guide (Basic) • FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk Storage Systems Configuration Guide (NAS) • FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- •...
Page 6 ETERNUS Web GUI. Refer to this manual for functions and advanced settings that User's Guide (Settings) are not described in "FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Web GUI)". This manual describes the monitoring information of the system status for the ETERNUS ETERNUS Web GUI DX/AF storage systems.
Page 7 Mozilla, Firefox, and the Mozilla and Firefox logos are trademarks or registered trademarks of the Mozilla Foundation in the United States and other countries. • BS2000 is a registered trademark of Fujitsu Technology Solutions • Arcserve is either a registered trademark or trademark of Arcserve or one of its subsidiaries.
Page 8 Microsoft® Windows Server® 2016 Standard • Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS. • Trademark symbols such as ™ and ® are omitted in this document. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 9 ETERNUS storage system models The following naming conventions describe ETERNUS storage system models in this manual. ETERNUS storage system models Naming conventions ETERNUS DX60 S3/DX100 S3/DX200 S3 Disk Storage Systems, storage system ETERNUS DX500 S3/DX600 S3 Disk Storage Systems, ETERNUS DX...
Page 10 Note that the screen shots in this manual were captured during development of the software and the actual screens may be different. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 11 7.0, 8.0, 9.0, 10.0 (desktop version), 11.0 (desktop version) Mozilla Firefox 3.6.x, ESR 10.0.x, ESR 17.0.x, ESR 24.0.x Display resolution – • 1024 × 768 or more • 24-bit color or more is recommended ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 12 Clear the [Display all websites in Compatibility View] checkbox (if this item is displayed) When using SSL (https), scroll to Security on the Internet Options-Advanced tab and clear the [Do not save encrypted pages to disk] checkbox. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 13: Table Of Contents
Audit Log .......................... 61 Firmware Maintenance ..................... 62 2.10 Storage Migration ......................63 2.10.1 Path Group Detail Information ........................65 2.11 Utility ..........................70 2.12 System Settings ........................ 71 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 14 Frontend Router Detail ....................143 3.12 Service Controller Detail ....................146 3.13 FE Power Supply Unit Detail .................... 148 3.14 FAN Unit Detail ....................... 150 3.15 Drive Enclosure Detail ..................... 152 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 15 Volume Detail (Reservation) ................... 232 4.13 Volume Detail (Pinned Data) ..................233 4.14 Volume Detail (Balancing TPV) ..................234 4.15 Volume Detail (Used RAID Group) ................... 235 4.16 Volume Detail (Snapshot) ....................236 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 16 LU QoS Group ............................... 290 NAS ..........................291 5.8.1 NAS Interface ............................... 295 5.8.2 Environment Settings ..........................296 5.8.3 Quota Management ............................ 301 5.8.4 Meta Cache Distribution ..........................304 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 17 Flexible Tier Sub Pool Detail (Basic) ......................349 7.2.6 Flexible Tier Sub Pool Detail (RAID Group) ....................351 7.2.7 Flexible Tier Sub Pool Detail (RAID Group Detail) ..................352 Settings (Thin Provisioning) .................... 355 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 18 Volume Status........................406 RAID Group Status......................407 Thin Provisioning Pool Status................... 409 Component Status ......................410 A.5.1 Drive Status ..............................411 Key Status ........................412 Key Server Status ......................413 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 19 Required Storage System Settings After HBA Replacement (When Host Affinity Settings are Used)................418 Required Storage System Settings After HBA Replacement (When Host Affinity Settings are not Used) ..............421 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 20: Chapter 1 Screen Operations
In this case, reserve the appli- cation schedule for the controller firmware again. Refer to "Apply Controller Firmware" in "ETERNUS Web GUI User’s Guide (Settings)" for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 21 SDP usage is displayed when one of the following conditions applies: Advanced Copy function license has been registered "Enable" is displayed for the "Unified Storage" field ■ For the ETERNUS DX60 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 22 Chapter 1 Screen Operations 1.1 Overview ■ For the ETERNUS DX100 S3 ■ For the ETERNUS DX200 S3, the ETERNUS DX500 S3/DX600 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 23 Chapter 1 Screen Operations 1.1 Overview ■ For the ETERNUS DX8100 S3 ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 24 Master CM is used to operate the ETERNUS DX (or when a user logs in to the ETERNUS DX8700 S3/DX8900 S3 by specifying the Master IP address (*1) via a web browser). Refer to "Setup Network Environment" in "ETERNUS Web GUI User’s Guide (Settings)" for details. System Messages ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 25 If the Unified Storage function is enabled, the ETERNUS DX can be used as a Unified Storage system (a SAN and NAS system). For the ETERNUS DX60 S3 and the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, this item is not displayed. For the ETERNUS AF250/AF650 and the ETERNUS DX200F, "Disable" is displayed.
Page 26 1.1 Overview • Deduplication/Compression Whether the Deduplication/Compression function is enabled or disabled is displayed. For the ETERNUS DX60 S3/DX100 S3 and the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, this item is not displayed. • Serial Number The serial number of the ETERNUS DX/AF is displayed.
Page 27 TPPs, the capacity of the RAID groups that configure FTRPs, the capacity of the RAID groups that are registered as REC Disk Buffers, and the capacity of the RAID groups that are registered as EXCPs. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 28 ETERNUS DX/AF. The "Maximum Pool Capacity" is specified by using the [Set Thin Provisioning] function. Refer to "Set Thin Provisioning" in "ETERNUS Web GUI User’s Guide (Settings)" for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 29 The total capacity of the SDP [TB/GB/MB] is displayed. The "Total Capacity" is the total capacity of the SDP in the ETERNUS DX/AF. Total Free Capacity = Total Capacity - Total Used Capacity ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 30: Screen Structures
■ Bread crumb list Bread crumb indicates the location of the current screen on ETERNUS Web GUI. Click the link to display the list screen of the target item. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 31 Click the [>>] button to switch the display of the action area. The number of operation targets that is selected in the Main area is displayed in the "Target:" field. When no selections are made, "0" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 32: List Screen/Detailed Screen
For some items, the same information may be displayed for the list screen and the detailed screen. From "Chapter 2 System Status" (page 35) onward, only the information for items in the detailed screen that is different from the list screen is described. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 33: Basic Operation
Note that the order of some display items that have specific meanings (such as the concatenation order of volumes) cannot be sorted. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 34 [Overview] screen automatically updates periodically according to the specified update interval. The header, bread crumb list, and navigation areas are not included in the screen shots in the following chapters and sections. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 35: Chapter 2 System Status
Storage Migration Utility Utility System Settings System Settings Detailed information of the system settings can be displayed from the following screen: • Eco-mode Schedule Detail • Path Group Detail Information ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 36: System (Basic Information)
"Modify Storage System Name" in "ETERNUS Web GUI User’s Guide (Settings)" • Click the "Storage System Name" in the category again to display the latest information in the screen. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 37 If the Unified Storage function is enabled, the ETERNUS DX can be used as a Unified Storage system (a SAN system and a NAS system). For the ETERNUS DX60 S3 and the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, this item is not displayed. For the ETERNUS AF250/AF650 and the ETERNUS DX200F, "Disable" is displayed.
Page 38 Whether the Virtual Volume function is enabled or disabled is displayed. The Virtual Volume function cannot be set with Web GUI. To set the Virtual Volume function, use ETERNUS SF Storage Cruiser. For the ETERNUS DX60 S3, this item is not displayed. • Serial Number The serial number of the ETERNUS DX/AF is displayed.
Page 39 YYYY-MM-DD hh:mm:ss (YYYY: Year (2001 - 2037), MM: Month (01 - 12), DD: Date (01 - 31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59)) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 40 0 - 255 (decimal) For IPv6 address • xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters) Refer to "IPv6 Address Notation" (page 253) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 41: Network
• Port The port type is displayed. For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F MNT and RMT For the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, and the ETERNUS AF650 MNT, RMT, and FST ETERNUS Web GUI User’s Guide (Operation)
Page 42 Whether the E-mail notification is enabled or disabled is displayed. ■ IPv6 Settings The network setting information is displayed. The SNMP Information and the E-Mail Information are displayed under the network setting information. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 43 • Port The port type is displayed. For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F MNT and RMT For the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, and the ETERNUS AF650 MNT, RMT, and FST •...
Page 44 • Port The port type is displayed. For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F MNT and RMT For the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, and the ETERNUS AF650 MNT, RMT, and FST ●...
Page 45 • SNMP Function Whether the SNMP function is enabled or disabled is displayed. ● E-Mail Information • Notification E-Mail Whether the E-mail notification is enabled or disabled is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 46: Remote Support
REMCS can be specified or restarted when the AIS Connect function is disabled. Refer to "Setup AIS Connect Environment" in "ETERNUS Web GUI User’s Guide (Settings)" for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 47 Termination of Controller Firmware Download in Progress Controller Firmware Upgrade in Progress Log Collection in Progress • Controller Firmware Version The current controller firmware version is displayed. VxxLyy-zzzz (Vxx: Version, Lyy: Level, zzzz: Release number) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 48 The periodical log transmission is enabled. The internal log of the ETERNUS DX/AF is automatically sent to the REMCS center according to the transmission schedule. Disable The periodical log transmission is disabled. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 49: Ais Connect
Environment" in "ETERNUS Web GUI User’s Guide (Settings)" for details. Use ETERNUS CLI to set "Service Contract Responsibility (Country Code : Country Name)". Note that the "Maintenance Operation" policy is required to set this item. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 50 Whether the automatic log transmission is enabled or disabled when an error occurs is displayed. When "Automatic Log Transmission" is enabled, the ETERNUS DX/AF automatically sends logs to the AIS Connect server when a fail event (error level or warning level) occurs. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 51: Root Certificate
For details on how to update the root certificate, refer to "Import Root Certificate" in "ETERNUS Web GUI User’s Guide (Settings)". • The root certificate is only used for authentication with the AIS Connect server. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 52 YYYY-MM-DD hh:mm:ss (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 - 31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59)) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 53: Key Management
This function displays the setting parameters for the key server. In this section, the SED authentication key is referred to as "key". The ETERNUS DX60 S3 does not support the key management functions. The following items are displayed in the Main area: ●...
Page 54: Key Group
SEDs that configure the RAID group are changed to hot spares or changed to new SEDs due to failure or maintenance, the ETERNUS DX/AF performs operations according to the selected security level. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 55 When the key status is "Unregistered Server Certificate", "No SSL Certificate", "Network Error", "Not Acquired", or "Key Server Error", a "-" (hyphen) is displayed. • YYYY-MM-DD (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 - 31)) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 56 The serial number for the SSL / KMIP certificate is displayed. If the certificate is not imported, the field is blank. When created, the serial number is combined with the issuer name, which is a unique number in the cer- tificate authority. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 57: Define Role
A custom role is a role created by the user in combination of policies, in addition to the default roles. The following items are displayed in the Main area: • Role The custom role name is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 58: Eco-Mode
The number of events that are registered in the schedule is displayed. If the Eco-mode is controlled with the Storage Foundation Software ETERNUS SF, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 59: Eco-Mode Schedule Detail
The time at which the event application is started is displayed. hh:mm (hh: Hour, mm: Minute) • To Time The time at which the event application is stopped is displayed. hh:mm (hh: Hour, mm: Minute) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 60: Event/Dump
Chapter 2 System Status 2.7 Event/Dump Event/Dump This function records and displays the event history of the ETERNUS DX/AF as an event log. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 61: Audit Log
Operations that can be performed when logged in using a user account with the "Maintenance Operation" policy. The following items are displayed in the Main area: • Audit Log Whether the audit log function is enabled or disabled is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 62: Firmware Maintenance
The current controller firmware version is displayed. VxxLyy-zzzz (Vxx: Version, Lyy: Level, zzzz: Release number) • Firmware Version after Restart The controller firmware version after the next power on is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 63: Storage Migration
Disk diagnosis of the disk drives in the RAID group to which the destination volume belongs CM hot expansion on the destination storage system Memory hot expansion on the destination storage system ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 64 (destination) storage system constitute a path group. • Vendor ID The manufacturer name of the source storage system to which the path is created is displayed. An inconvertible code is displayed as "*". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 65: Path Group Detail Information
The status display priority order is " Error" > " Normal" > " Stop" > " Complete". 2.10.1 Path Group Detail Information In this screen, the detailed information of a path group is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 66 Data migration from the source storage system to the destination storage system is performed. Stop the operation only when switching the host connection to the migration destination storage system. This enables continued host access to the migration destination volume during the data migration. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 67 "-" (hyphen) is displayed. Refer to "Download Template File for Storage Migration Settings" in "ETERNUS Web GUI User’s Guide (Settings)" for details. • Source LUN (Hex) The source LUN is displayed in hexadecimal number. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 68 If "Waiting" is displayed, the data migration does not start automatically. Restart the data migration manually. • Progress The data transfer progress is displayed. This item is displayed only when the previous screen is the [Storage Migration] screen. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 69 An error message is displayed when an error is detected in the source LUN or destination volume. This item is displayed only when the previous screen is the [Start Storage Migration] screen. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 70: Utility
Chapter 2 System Status 2.11 Utility 2.11 Utility Descriptions on the actions that can be started from the [Utility] screen are displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 71: System Settings
For controller firmware versions "V10L50-3000", "V10L52-3000", and "V10L53" and later • Fujitsu Original Encryption • AES-128 • AES-256 • Disable For controller firmware versions other than the above • Fujitsu Original Encryption • • Disable ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 72 Whether the Disk Drive Patrol function is enabled or disabled is displayed. • Extreme Cache Mode The selected Extreme Cache (EXC) mode is displayed. For the ETERNUS DX60 S3, the ETERNUS DX8100 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F, this item is not displayed. Extreme Cache Extreme Cache Pool Not Used •...
Page 73: Chapter 3 Component Status
I/O Module Error Statistics Port Error Statistics Power Supply Unit Power Supply Unit (DE) Fan Expander Module Fan Expander Module Drives Drives Performance Performance (Drive) Error Statistics Drive Error Statistics ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 74 • Fan Expander Module Detail • Drive Detail • Bootup and Utility Device Detail • SAS Cable Detail • Frontend Cable Detail • Management Cable Detail • Port Detail ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 75: Storage (Basic Information)
3.1 Storage (Basic Information) Storage (Basic Information) The general information for the ETERNUS DX/AF is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 76 Whether the model upgrade is possible or not is displayed. When this item is not displayed, the model upgrade is not possible. Not Upgraded A model upgrade has not been performed yet. Upgraded A model upgrade has been performed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 77 3.1 Storage (Basic Information) ■ View ● For the ETERNUS DX60 S3 ● For the ETERNUS DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3 (DE#00 - DE#17), the ETERNUS DX8100 S3, or the ETERNUS AF650 ETERNUS Web GUI User’s Guide (Operation)
Page 78 Chapter 3 Component Status 3.1 Storage (Basic Information) ● For the ETERNUS DX500 S3/DX600 S3 (DE#00 - DE#1A) ● For the ETERNUS DX8700 S3/DX8900 S3 (CE/FE) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 79 Chapter 3 Component Status 3.1 Storage (Basic Information) ● For the ETERNUS DX8700 S3/DX8900 S3 (DE#xx) ● For the ETERNUS AF250 or the ETERNUS DX200F ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 80 "3.6 Controller Enclosure Detail" (page 117) for display items. For the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX8100 S3, click the [DE] link to display the [Drive Enclosure Detail] screen. Refer to "3.15 Drive Enclosure Detail" (page 152) for display items.
Page 81: Controller Enclosure
This function is displayed for the ETERNUS DX8700 S3/DX8900 S3. For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F, clicking "Controller Enclosure" in the category displays the [Controller Enclosure Detail] screen.
Page 82: Controller Module
This item is displayed for the ETERNUS DX8700 S3/DX8900 S3. • The CM number is displayed. By clicking this item, the [Controller Module] screen is displayed. Refer to "3.7 Controller Module Detail" (page 127) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 83: Performance (Cm)
The interval for acquiring performance information can be specified when starting the monitoring. When using ETERNUS Web GUI, the default interval is 30 seconds. • The average performance values during the specified interval are displayed. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 84 The remaining capacity of the copy session is displayed. "Copy Remainder Count" is displayed for each Controlling CM in the RAID group to which the copy source volume belongs. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 85: Port Error Statistics (For The Eternus Af250 And The Eternus Dx200F)
"Invalid Dword" indicates an error in the SAS transmission line. The SAS interface encodes 8-bit to 10-bit to improve the transmission error ratio. This error is detected when the SAS interface fails encoding. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 86: Channel Adapter
Select the installation location of the chip that is to be displayed. 3.2.4 Channel Adapter The information of all the CAs registered in the ETERNUS DX/AF is displayed. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 87 "3.8 Channel Adapter Detail" (page 132) for display items. • Type The CA type is displayed. The display items in this filed vary depending on the storage system model. For the ETERNUS DX60 S3 • FC 2port • 1G-iSCSI 2port •...
Page 88 • 10G-iSCSI 2port Note that a 1-port type CA for the ETERNUS DX60 S3/DX100 S3 is displayed as "2port" (for FC, "FC 2port" is displayed). Similarly, a 2-port type CA (1G-NAS) is displayed as "1G-NAS 4port". Available ports can be checked in the [Internal Parts] tab of the [Channel Adapter Detail] screen. The [Add Channel Adapter Port] function is displayed in the action field only when a 1-port type CA or a 2-port type CA is for details.
Page 89: Performance (Ca)
The interval for acquiring performance information can be specified when starting the monitoring. When using ETERNUS Web GUI, the default interval is 30 seconds. • The average performance values during the specified interval are displayed. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 90 The number of writes per second is displayed. • Read Throughput The amount of data that is read per second is displayed. • Write Throughput The amount of data that is written per second is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 91: Pcie Flash Module
CM is reduced to the smallest capacity. • For the ETERNUS DX8700 S3/DX8900 S3, the PFM capacity in each CM is used as an EXC memory size. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 92 Warning" is displayed as the status. The PFM is approaching its end of life. " Error" is displayed as the status. Reading from or writing to the PFM is not available. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 93: Performance (Pcie Flash Module)
The average performance values during the specified interval are displayed. • PFMs can be installed in the ETERNUS DX500 S3/DX600 S3 and the ETERNUS DX8700 S3/DX8900 S3. ■ For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 94 When performance monitoring has started, the busy rate of the PFM is displayed with a bar and a numerical number. If performance monitoring has stopped, "0%" is displayed for the busy rate. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 95: Bootup And Utility Device
The BUD number is displayed. Click this item to display the [Bootup and Utility Device Detail] screen. Refer to "3.20 Bootup and Utility Device Detail" (page 169) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 96: Power Supply Unit (Ce)
The error code of BUD is displayed. 3.2.9 Power Supply Unit (CE) The PSU information for a CE is displayed. ■ For the ETERNUS DX8700 S3/DX8900 S3 ■ For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 97: Battery
The PSU number is displayed. By clicking this item, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to "3.10 PSU/CPSU (CE) Detail" (page 140) for display items. This item is displayed for the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F. • CPSU The CPSU number is displayed.
Page 98 When the battery charge level is 90% or more, "Full Charge" is displayed. When the battery charge level is less than 90%, "xx%" is displayed. Expiration Date The expiration date for the BTU is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 99 The BCU status is displayed. Refer to "A.5 Component Status" (page 410) for details. Status Code The BCU status code is displayed. Error Code The BCU error code is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 100: 3.3 Frontend Enclosure
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is displayed. For the "Exhaust Temp" field, a "-" (hyphen) is usually displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 101 "A.5 Component Status" (page 410) for details. • Status Code The status code of each component is displayed. • Error Code The error code of each component is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 102 "A.5 Component Status" (page 410) for details. • Status Code The status code of each component is displayed. • Error Code The error code of each component is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 103: Frontend Router
The FRT status is displayed. Refer to "A.5 Component Status" (page 410) for details. 3.3.2 Service Controller The SVC information is displayed. This function is displayed for the ETERNUS DX8700 S3/DX8900 S3. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 104: Power Supply Unit (Fe)
Refer to "3.13 FE Power Supply Unit Detail" (page 148) for display items. • Status The FPSU status is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 105: Fan Unit
The FANU number is displayed. By clicking the FANU number, the [FAN Unit Detail] screen is displayed. Refer to "3.14 FAN Unit Detail" (page 150) for display items. • Status The FANU status is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 106: Operation Panel
The part number of the OPNL is displayed. • Serial Number The serial number of the OPNL is displayed. • Hardware Revision The hardware version of the OPNL is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 107: Drive Enclosure
"A.5 Component Status" (page 410) for details. • Type The DE type is displayed. The DE type indicates the drive size and the maximum number of drives that can be installed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 108: I/O Module
The filter setting is displayed for the ETERNUS DX8700 S3/DX8900 S3. Filter Description Enclosure Select the DE that is to be displayed. Status Select the IOM status that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 109: Port Error Statistics
"Invalid Dword" indicates an error in the SAS transmission line. The SAS interface encodes 8-bit to 10-bit to improve the transmission error ratio. This error is detected when the SAS interface fails encoding. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 110: Power Supply Unit (De)
By clicking this item, the [Power Supply Unit (DE)] screen is displayed. Refer to "3.17 Power Supply Unit (DE) Detail" (page 159) for display items. • Status The PSU status is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 111: Fan Expander Module
The FEM number is displayed. Click this item to display the [Fan Expander Module Detail] screen. Refer to "3.18 Fan Expander Module Detail" (page 161) for display items. • Status The FEM status is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 112: Drives
SSD-Ls are available at a lower cost per capacity than conventional SSDs by optimizing the guaranteed write endurance and the reserved space. • Speed The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed. 15000 rpm 10000 rpm 7200 rpm ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 113 Unless otherwise specified, this manual refers to "SSD-M", "SSD-L", and "SSD" collectively as "SSD". In this manual, there may be cases when "SSD SED" is used as a collective term for options and drive types. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 114 When not using the drive capacity for filtering, specify "0". Type Select the drive type that is to be displayed. Usage Select the usage of the drive that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 115: Performance (Drive)
The drives with a busy rate that exceeds the specified minimum busy rate are Minimum Busy Rate displayed. When not using the minimum busy rate for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 116: Drive Error Statistics
The number of I/O Timeout occurrences is displayed. • Link Error The number of Link Error occurrences is displayed. • Check Code Error The number of Check Code Error occurrences is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 117: 3.6 Controller Enclosure Detail
Chapter 3 Component Status 3.6 Controller Enclosure Detail Controller Enclosure Detail The detailed CE information is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 118 The temperature of CM#1 is displayed in Celsius (C) and in Fahrenheit (F). If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 119 The image that is displayed in this screen varies depending on the storage system model. ● For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F The following items are displayed in the Main area: Storage system image The front view of the CE that is installed in the ETERNUS DX/AF is displayed.
Page 120 Hot Spare. Click this item to display the [RAID Group Detail] screen. When the usage is not "Dedicated Hot Spare" and the drive is not registered in a RAID group, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 121 The status of each component is displayed. Refer to "A.5 Component Status" (page 410) for details. Status Code The status code of each component is displayed. Error Code The error code of each component is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 122 The status of each component is displayed. Refer to "A.5 Component Status" (page 410) for details. Status Code The status code of each component is displayed. Error Code The error code of each component is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 123 The status of each component is displayed. Refer to "A.5 Component Status" (page 410) for details. Status Code The status code of each component is displayed. Error Code The error code of each component is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 124 The image that is displayed in this screen varies depending on the storage system model. ● For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F The following items are displayed in the Main area: Storage system image The rear view of the CE that is installed in the ETERNUS DX/AF is displayed.
Page 125 By clicking the CPSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to "3.10 PSU/CPSU (CE) Detail" (page 140) for display items. Status The status of each component is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 126 By clicking the CPSU number, the [Controller Enclosure Power Supply Unit] screen is displayed. Refer to "3.10 PSU/CPSU (CE) Detail" (page 140) for display items. Status The status of each component is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 127: Controller Module Detail
Chapter 3 Component Status 3.7 Controller Module Detail Controller Module Detail The detailed CM information is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 128 "A.5 Component Status" (page 410) for details. • CPU#n Status Code The status code of CPU#0 or CPU#1 is displayed. • CPU#n Error Code The error code of CPU#0 or CPU#1 is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 129 Chapter 3 Component Status 3.7 Controller Module Detail ■ Internal Parts ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 130 • Notes Remarks are displayed. When "Parts" is "Memory", the memory capacity is displayed. When "Parts" is "SCU", the voltage information is displayed (for the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F). ■ View ●...
Page 131 The rear view of the CE that is installed in the ETERNUS DX/AF is displayed. Components that are not the target CM are grayed out. The CM status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 132: Channel Adapter Detail
3.8 Channel Adapter Detail Channel Adapter Detail The detailed information for the Channel Adapter is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 133 Location The CA installation location is displayed. • CA Type The CA type is displayed. The display items in this field vary depending on the storage system model. For the ETERNUS DX60 S3 • FC 2port • 1G-iSCSI 2port •...
Page 134 • 10G-iSCSI 2port Note that a 1-port type CA for the ETERNUS DX60 S3/DX100 S3 is displayed as "2port" (for FC, "FC 2port" is displayed). Similarly, a 2-port type CA (1G-NAS) is displayed as "1G-NAS 4port". Available ports can be checked in the [Internal Parts] tab.
Page 135 The CA port number is displayed. By clicking this item, the [Port] screen is displayed. Refer to "3.24 Port Detail" (page 174) for display items. • Status The CA port status is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 136 The rear view of the CE that is installed in the ETERNUS DX/AF is displayed. Components that are not the target CA are grayed out. The CA status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 137: Pcie Flash Module Detail
3.9 PCIe Flash Module Detail PCIe Flash Module Detail The detailed information for the PFM is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 138 Serial No. The serial number of the PFM is displayed. • Hardware Revision The hardware version of the PFM is displayed. ■ View ● For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 139 The front view of the CEs (CMs) that are installed in the ETERNUS DX is displayed. Components that are not the target PFM are grayed out. The PFM status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 140: Psu/Cpsu (Ce) Detail
3.10 PSU/CPSU (CE) Detail The detailed information for the PSU or the CPSU is displayed. ■ Summary ● For the ETERNUS DX8700 S3/DX8900 S3 ● For the other models ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 141 The serial number of PSU or CPSU is displayed. • Hardware Revision The hardware version of PSU or CPSU is displayed. ■ View ● For the ETERNUS DX8700 S3/DX8900 S3 ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 142 Components that are not the target PSU or CPSU are grayed out. The PSU status or the CPSU status is displayed with an icon. Refer to "A.5 Component Status" (page 410) details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 143: Frontend Router Detail
The part number of the FRT is displayed. • Serial No. The serial number of the FRT is displayed. • Hardware Revision The hardware version of the FRT is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 144 "Cu" is displayed when the connection cable between CM and FRT is a Frontend electric cable. "AOC (Active Optical Cable)" is displayed when the connection cable between CM and FRT is a Frontend optical cable. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 145 The rear view of the FE that is installed in the ETERNUS DX/AF is displayed. Components that are not the target FRT are grayed out. The FRT status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 146: Service Controller Detail
Next EC The EC number of the controller firmware that is to be run at the next power-on is displayed. • Firmware Version The current controller firmware version is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 147 The front view of the FE that is installed in the ETERNUS DX is displayed. Components that are not the target SVC are grayed out. The SVC status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 148: Fe Power Supply Unit Detail
The part number of the FPSU is displayed. • Serial No. The serial number of the FPSU is displayed. • Hardware Revision The hardware version of the FPSU is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 149 The rear view of the FE that is installed in the ETERNUS DX is displayed. Components that are not the target FPSU are grayed out. The FPSU status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 150: Fan Unit Detail
The part number of the FANU is displayed. • Serial No. The serial number of the FANU is displayed. • Hardware Revision The hardware version of the FANU is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 151 The front view of the FE that is installed in the ETERNUS DX is displayed. Components that are not the target FANU are grayed out. The FANU status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 152: 3.15 Drive Enclosure Detail
"-" (hyphen) is displayed. For the "Exhaust Temp" field, a "-" (hyphen) is usually displayed. This item is not displayed when the ETERNUS DX is a 1CM model. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 153 Chapter 3 Component Status 3.15 Drive Enclosure Detail ■ Front View ● For 2.5" DEs ● For 3.5" DEs ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 154 "1.92TB SSD-L" is displayed as "2.00 TB". • Speed The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed. 15000 rpm 10000 rpm 7200 rpm ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 155 A "-" (hyphen) is displayed in the following conditions: The drive is neither "SSD" nor "SSD SED" The lifetime information cannot be obtained ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 156 "3.18 Fan Expander Module Detail" (page 161) for display items. • Status The status of IOM, PSU, or FEM is displayed. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 157: 3.16 I/O Module Detail
The part number of the IOM is displayed. • Serial Number The serial number of the IOM is displayed. • Firmware Version The current controller firmware version is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 158 The rear view of the DE that is installed in the ETERNUS DX/AF is displayed. Components that are not the target IOM are grayed out. The IOM status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 159: Power Supply Unit (De) Detail
The part number of the PSU is displayed. • Serial Number The serial number of the PSU is displayed. • Hardware Revision The hardware version of the PSU is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 160 The rear view of the DE that is installed in the ETERNUS DX/AF is displayed. Components that are not the target PSU are grayed out. The PSU status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 161: Fan Expander Module Detail
The status code of FEM Expander#n (n=0,1) is displayed. • EXP#n Error Code The error code of FEM Expander#n (n=0,1) is displayed. • EXP#n WWN The WWN of FEM Expander#n (n=0,1) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 162 The component information is displayed. • Status The component status is displayed. Refer to "A.5 Component Status" (page 410) for details. • Error Code The component error code is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 163 The rear view of the DE that is installed in the ETERNUS DX is displayed. Components that are not the target FEM are grayed out. The FEM status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 164: Drive Detail
The drive capacity that is displayed for the SSD-L differs from the product's actual capacity. For example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 165 Hot Spare. Click this item to display the [RAID Group Detail] screen. When the usage is not "Dedicated Hot Spare" and the drive is not registered in a RAID group, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 166 The drive manufacturer name is displayed. • Serial Number The serial number of the drive is displayed. • The drive WWN is displayed. • Firmware Version The drive firmware version is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 167 Chapter 3 Component Status 3.19 Drive Detail ■ View ● For 2.5" DEs ● For 3.5" DEs ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 168 Drives that are not selected in the [Drives] screen are grayed out. The drive status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 169: Bootup And Utility Device Detail
The part number of the BUD is displayed. • Serial No. The serial number of the BUD is displayed. • Hardware Revision The hardware version of the BUD is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 170 The front view of the CE that is installed in the ETERNUS DX is displayed. Components that are not the target BUD are grayed out. The BUD status is displayed with an icon. Refer to "A.5 Component Status" (page 410) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 171: Sas Cable Detail
The SAS cable status is displayed. Refer to "A.5 Component Status" (page 410) for details. • Status Code The SAS cable status code is displayed. • Error Code The SAS cable error code is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 172: Frontend Cable Detail
The serial number of the Frontend cable is displayed. • Hardware Revision The hardware version of the Frontend cable is displayed. If the hardware version cannot be obtained, the field is blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 173: Management Cable Detail
The Management cable status is displayed. Refer to "A.5 Component Status" (page 410) for details. • Status Code The Management cable status code is displayed. • Error Code The Management cable error code is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 174: 3.24 Port Detail
3.24 Port Detail The detailed information of the port is displayed. The ETERNUS DX60 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support "NAS". Display items vary depending on the port type ("FC port"...
Page 175 If the status is " Unknown", a "-" (hyphen) is displayed. • Link Down • 4 Gbit/s Link Up • 8 Gbit/s Link Up • 16 Gbit/s Link Up ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 176 512 byte • 1024 byte • 2048 byte Part Number The part number of the port is displayed. If the part number cannot be acquired, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 177 "Temperature", "Voltage", "Current", "TX Power", and "RX Power" are displayed as the CM#x CA#y port infor- mation in "3.8 Channel Adapter Detail" (page 132). In this screen, "Sensor Information" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 178 V (x: 0.00 to 6.55) • Alarm Low or High The Alarm threshold (Low/High) for the voltage of the SFP in the port is displayed. • x V (x: 0.00 to 6.55) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 179 (x: 0.00 to 6.55) • Alarm Low or High The Alarm threshold (Low/High) for the received power of the SFP in the port is displayed. • x mW (x: 0.00 to 6.55) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 180 10G Base-T iSCSI Multiple VLAN Whether the Multiple VLAN is enabled or disabled for the port is displayed. A "-" (hyphen) is displayed when the port mode is "RA". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 181 Note that the IPv6 address is displayed as an abbreviation. If not specified, a "-" (hyphen) is displayed. • IPv6 address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters) Refer to "IPv6 Address Notation" (page 253) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 182 If the serial number cannot be acquired, a "-" (hyphen) is displayed. Hardware Revision The hardware version of the port is displayed. If the hardware version cannot be acquired, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 183 If not specified, a "-" (hyphen) is displayed. • IPv6 address fe80::xxxx:xxxx:xxxx:xxxx xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters) Refer to "IPv6 Address Notation" (page 253) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 184 Status Code The port status code is displayed. Error Code The port error code is displayed. Type The type of the port (fixed to "SAS") is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 185 If the serial number cannot be acquired, a "-" (hyphen) is displayed. Hardware Revision The hardware version of the port is displayed. If the hardware version cannot be acquired, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 186 A connection type that connects multiple nodes in a loop. Transfer Rate The transfer speed of the port (fixed to "10 Gbit/s") is displayed. If the status is " Unknown", a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 187 • Unknown The temperature, voltage, current, transmission power, and received power for the SFP in the port are dis- played. Refer to "FC port" (page 174) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 188 Status Code The port status code is displayed. Error Code The port error code is displayed. Type The type of the port is displayed. • 10G NAS • 1G NAS ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 189 CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number) Number of VLAN IP Addresses The number of VLAN IP addresses for the port is displayed. If VLAN is not set, "0" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 190 Note that the IPv6 address is displayed as an abbreviation. If not specified, a "-" (hyphen) is displayed. • IPv6 address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters) Refer to "IPv6 Address Notation" (page 253) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 191 When the information cannot be obtained, a "-" (hyphen) is displayed. The target components for this information are 10G NAS that have SFPs from which information can be obtained. Refer to "Sensor Information" (page 178) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 192 0 - ffff (hexadecimal, "a" - "f" are lowercase letters) Refer to "IPv6 Address Notation" (page 253) for details. This item is displayed for all of the VLAN settings. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 193: Chapter 4 Volume Status
Detailed information of the volumes can be displayed from the following screens: • Volume Detail (Basic) • Volume Detail (Reservation) • Volume Detail (Pinned Data) • Volume Detail (Balancing TPV) • Volume Detail (Used RAID Group) • Volume Detail (Snapshot) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 194: Volume (Basic Information)
WSV is a volume that is created by concatenating distributed areas in from 2 to 64 RAID groups. Processing speed is fast because data access is distributed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 195 When the volume type is "SDV", the virtual capacity is displayed. The virtual capacity indicates the capacity that is secured automatically when creating SDVs (24 (MB) + copy source volume capacity x 0.1%). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 196 The RAID group name to which the volume belongs is displayed. • Encryption The encryption status is displayed. For the ETERNUS DX60 S3, this item is not displayed. A volume that is encrypted by CM "-" (hyphen) A volume that is not encrypted (plain text volume) A volume that is encrypted by SED •...
Page 197 "$VVOL_META" is a system volume that is used for storing the management information (metadata) of the Virtual Volume function. This item is displayed only when "Enable" is selected for the Virtual Volume function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 198 Provisioning Pool)" (page 334) for details. • The threshold for FTRPs can be checked in the [Flexible Tier Pool] screen. Refer to "7.2.1 Flexible Tier Pool (Basic Information)" (page 340) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 199 Select the usage of the volume that is to be displayed. Select the encryption status of the volume that is to be displayed. Encryption For the ETERNUS DX60 S3, this item is not displayed. Process Select which current process for the volume is to be displayed.
Page 200: Performance (Host I/O)
The volume number is displayed. Click this item to display the [Volume Detail] screen. • Name The volume name is displayed. Click this item to display the [Volume Detail] screen. • Type The volume type is displayed. Standard SDPV Temporary ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 201 The mode (Extreme Cache or Extreme Cache Pool) that is being used for the ETERNUS DX is displayed in the [System Settings] screen. Refer to "2.12 System Settings" (page 71) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 202 (Read I/O and Write I/O) is displayed. If the difference in addresses between the start address of the previous I/O and the start address of the received I/O is within (I/O size x Specified value), it is determined as sequential data. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 203 When not using the volume name for filtering, leave this item blank. Type Select the volume type that is to be displayed. Usage Select the usage of the volume that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 204: Performance (Qos)
This function displays the performance information of the volume QoS for Host I/O. IOPS, throughput, and the bandwidth limit for each volume can be checked. The ETERNUS DX60 S3 does not support this function. • The target volume types for this function are Standard, SDV, WSV, TPV (including NAS user volumes and Deduplication/Compression Volumes), and FTV.
Page 205 Select the volume type that is to be displayed. Type "TPV" and "FTV" are displayed as options only when the Thin Provisioning function is enabled. Usage Select the usage of the volume that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 206: Performance (Advanced Copy)
The volume number is displayed. Click this item to display the [Volume Detail] screen. • Name The volume name is displayed. Click this item to display the [Volume Detail] screen. • Type The volume type is displayed. Standard SDPV Temporary ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 207 • Volume type is "SDV" or "SDPV" • Volumes that are created in a RAID group or a TPP configured with SSDs or SSD SEDs • ODX Buffer volumes ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 208 When not using the volume name for filtering, leave this item blank. Type Select the volume type that is to be displayed. Usage Select the usage of the volume that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 209: Lun Group
When the volume is being used by the Storage Cluster function, "Enable" is displayed. When no volumes are used for the Storage Cluster function, "Disable" is displayed. This item is displayed only when "Enable" is selected for the Storage Cluster function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 210 Select the Storage Cluster function usage status for the volume that is to be displayed. Storage Cluster This item is displayed only when "Enable" is selected for the Storage Cluster function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 211: Reservation
The host LUN, which is allocated to the volume, is displayed. When the volume is not reserved, a "-" (hyphen) is displayed. • Registrant Count The number of reservation keys registered in the volume is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 212 Select the reservation type that is to be displayed. Reservation Status Select the status of reservations that is to be displayed. APTPL Select the APTPL that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 213: Pinned Data
The volume name is displayed. Click this item to display the [Volume Detail] screen. Refer to "4.13 Volume Detail (Pinned Data)" (page 233) for display items. • Pinned Data Count The number of pinned data is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 214 If the type is not one of the types listed above The RAID group name to which the volume belongs is displayed. • Controlling CM The Controlling CM of the RAID group to which the volume belongs is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 215: Bad Sector
When the volume type is WSV or when the volume is concatenated by LUN concatenation, "Volume name (n/m)" (n: nth volume in the concatenation order, m: number of concatenated volumes) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 216 Each volume is displayed in "volume name (n/m)" format (n: nth volume in the concatenation order, m: number of concatenated volumes). Refer to "4.1 Volume (Basic Information)" (page 194) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 217: Balancing Thin Provisioning Volume
Status The volume status is displayed. Refer to "A.2 Volume Status" (page 406) for detailed information of volume status. • Type The volume type (fixed to "TPV") is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 218 TPV or an FTV is filled with zeros. If "Start Optimizing TPV/FTV Capacity after migration" is enabled for the RAID migration function, the migration source volume is reserved for capacity optimization. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 219 Select the usage of the volume that is to be displayed. Balancing Level Select the volume type that is to be displayed. Process Select which current process for the volume is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 220: Snapshot
This function displays the Snapshot configuration information of the NAS user volume. This function is displayed in a Unified Storage environment. The ETERNUS DX60 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support this function.
Page 221 The maximum number of generations when "Memory Extension" described below is installed. • ETERNUS DX100 S3 16GB/CM (the controller firmware version is V10L53 or later) • ETERNUS DX200 S3 32GB/CM (the controller firmware version is V10L33 or later) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 222 To display volumes without the Snapshot setting, select "-" (hyphen). Select the Snapshot session status of the volume that is to be displayed. Session Status To display volumes without the Snapshot setting, select "-" (hyphen). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 223: Volume Detail (Basic)
Chapter 4 Volume Status 4.11 Volume Detail (Basic) 4.11 Volume Detail (Basic) The detail information of the volume is displayed. ● Standard volume ● ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 224 RAID group is displayed in this field. This item is displayed when the volume type is "Standard", "WSV", "SDV", "SDPV", or "Temporary". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 225 The version of the NAS file system (NAS user volume). For the details, refer to "NAS FS Version" (page 226). The "file size" indicates the size of the user data that is created in the shared folder. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 226 If the "NAS FS Block Size" is "8KB" or "32KB" and the file system format for the NAS user volume where the "NAS FS Version" is "3" is converted, the maximum capacity of the NAS user volume that can be created is expanded. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 227 This item is displayed only when the volume type is "FTV". • Encryption The encryption status of the volume is displayed. For the ETERNUS DX60 S3, this item is not displayed. The volume that is encrypted by CM. "-" (hyphen) The volume that is not encrypted.
Page 228 The NAS Backup type volumes are created by ETERNUS CLI or ETERNUS SF Storage Cruiser. • NAS Snapshot The Snapshot destination SDVs that are used for NAS. NAS Snapshots are automatically created when performing the [Set Snapshot] function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 229 Capacity" or "Reserved Optimizing Capacity" is displayed as "yy". If no process is being performed, a "-" (hyphen) is displayed. Encrypting Formatting Migrating Balancing Optimizing Capacity Reserved Optimizing Capacity ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 230 The "Used Device Space" indicates the NAS user volume capacity that has already been used by the user. This item is displayed only when the usage details of the volume is "NAS Data". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 231 This item is displayed only when the usage details of the volume is "NAS Data". • File System Information The mount state of the file system is displayed. This item is displayed only when the usage details of the volume is "NAS Data". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 232: Volume Detail (Reservation)
Whether the target reservation key is used for persistent reservation is displayed. When the volume is in reservation status other than persistent reservation status, "No" is displayed. In persistent reservation status Not in persistent reservation status ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 233: Volume Detail (Pinned Data)
When not using the ASC for filtering, leave this item blank. Input the ASCQ that is to be displayed. ASCQ When not using the ASCQ for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 234: Volume Detail (Balancing Tpv)
This is the capacity that is available when balancing of the target TPV is started. Note that it is not the capacity after re-allocating the physical capacity in the relevant TPV to the RAID groups in the TPP. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 235: Volume Detail (Used Raid Group)
The volume capacity is displayed with "MB", "GB", or "TB". The unit of measurement for the capacity is determined according to the actual volume size. The capacity is also displayed with "KB". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 236: Volume Detail (Snapshot)
If the Snapshot is not set or if the collection mode (or the "Mode" setting) for Snapshot is set to "Manual", a "-" (hyphen) is displayed. • Active • Inactive ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 237 "-" (hyphen) is displayed. RAID Group Name The RAID group name that the Snapshot destination SDV belongs to is displayed. If the Snapshot is not set, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 238 The Snapshot is stopped due to an error. • Volume No. The volume number for the Snapshot destination SDV is displayed. • Volume Name The volume name for the Snapshot destination SDV is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 239: Chapter 5 Connectivity Status
SAS Port QoS FCoE FCoE Port QoS LU QoS Group LU QoS Group NAS Interface NAS Interface Environment Settings Environment Settings Quota Management Quota Management Meta Cache Distribution Meta Cache Distribution ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 240 • Host Affinity Detail (Host - CA Port - LUN Group Setting) • Host Group Detail • LUN Group Detail • Host-LU QoS Performance Information • LUN Group : LU QoS Group Detail ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 241: Connectivity (Basic Information)
The CA port group names for which the host affinity setting is configured are displayed. Regardless of whether the CA port belongs to a CA port group, a "-" (hyphen) is displayed if the host affinity setting is specified for a CA port. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 242 This item is displayed only when "Enable" is selected for the Virtual Volume function. Host affinities of which the Virtual Volume function is enabled cannot be modified by using ETERNUS Web GUI. To change host affinities, use the ETERNUS SF Storage Cruiser. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 243 "LUN_Group_www" has been Port#1 configured to the device side CA port, "CM#1 CA#1 Port#1". Hosts, CA ports, and LUN groups are allocated without specifying a host group or CA port group. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 244 Select the set state of the Virtual Volume function that is to be displayed. Virtual Volume This item is only displayed when "Enable" is selected for the Virtual Volume function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 245: Host Affinity Detail (Host Group - Ca Port Group - Lun Group Setting)
If "All" has been selected for the host group, "All" is also displayed for the host. • CA Port The location information of the CA port which has the host affinity setting with the relevant host is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 246: Host Affinity Detail (Host - Ca Port - Lun Group Setting)
The location information of the CA port, which is allocated with the selected host, is displayed. • LUN Group The LUN group that is allocated with the selected host, or a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 247: Host Group
The host response name that has been assigned to a host group is displayed. • Number of Hosts The number of hosts that have been registered in the host group is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 248: Host Group Detail
Whether the host group is "Active" or "Inactive" in the host affinity setting is displayed. • Number of Hosts The number of hosts, which have been registered in the host group, is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 249: Fc/Fcoe Host
The following items are displayed in the Main area: • The FC host number is displayed. • Name The FC host name is displayed. • The FC host WWN is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 250 Select the name of the host response that is assigned to the FC host that is to be Host Response displayed. Status Select the set state of the host affinity for the FC host that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 251: Iscsi Host
For the other models CM#y CA#z Port#w • Host Response The host response that is assigned to the iSCSI host or to the host group of the iSCSI host is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 252 When not using the IP address for filtering, leave this item blank. Input the Alias name of the iSCSI host that is to be displayed. Alias Name When not using the Alias name for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 253 (3) Replacement of a block with consecutive zeros by "::" is performed only once. [Example] 2001:1000:120:0:0:123:0:0 2001:1000:120::123:0:0 is OK 2001:1000:120::123:: is not allowed (Replacement of a block with consecutive zeros by "::" is allowed only once.) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 254: Sas Host
If no CA port with the host affinity setting exists, a "-" (hyphen) is displayed. For the ETERNUS DX8700 S3/DX8900 S3 CE#x CM#y CA#z Port#w For the other models CM#y CA#z Port#w ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 255 Select the name of the host response that is assigned to the SAS host that is to be Host Response displayed. Status Select the set state of the host affinity for the SAS host that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 256: Ca Port Group
The CA port group is used for the host affinity settings. The LUN group can be accessed from the host group via the CA port group. Inactive The CA port group is not used for the host affinity settings. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 257: Fc Port
SFP+(MMF) An SFP (8G SFP+) that is installed in an 8Gbit/s (maximum) FC port. 16G SFP+(SMF) An SFP (16G LongWave) that is installed in a 16Gbit/s (maximum) FC port. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 258 Reset (cancel) the command request from the server that sent the command reset request. T_L (T: Target, L: LUN) Reset (cancels) the command request from all of the servers that are connected to the port. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 259 The name of the port group to which the target port belongs is displayed. If the target port does not belong to a port group, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 260: Iscsi Port
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the target port is displayed. For the ETERNUS DX8700 S3/DX8900 S3 CE#x CM#y CA#z Port#w For the other models CM#y CA#z Port#w ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 261 10Gbit/s iSCSI. The port mode can be changed (CA, RA, or CA/RA). 10G Base-T iSCSI 10Gbit/s iSCSI. The port mode can be changed (CA, RA, or CA/RA). This port can be installed in the ETERNUS DX60 S3, the ETERNUS DX100 S3/DX200 S3, and the ETERNUS AF250. • Status The status of the target port is displayed.
Page 262 When the target port is being used by the Storage Cluster function, "Used" is displayed, and "Unused" is displayed when the target port is not used. This item is only displayed when "Enable" is selected for the Storage Cluster function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 263: Sas Port
Parameters of the SAS ports that are registered in the ETERNUS DX are displayed. The ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, the ETERNUS AF250/ AF650, and the ETERNUS DX200F do not support this function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 264 SAS host addresses of all SAS hosts that have the host affinity setting with the target port are displayed. If the host affinity setting is not configured, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 265: Fcoe Port
FCoE Port Parameters of the FCoE ports that are registered in the ETERNUS DX are displayed. The ETERNUS DX60 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support this function. The following items are displayed in the Main area: •...
Page 266 WWNs of all FC/FCoE hosts that have the host affinity setting with the target port are displayed. If the host affinity setting is not configured, the field is blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 267 Input the WWN of the FC/FCoE host that has the host affinity setting with the port that is to be displayed. When not using the WWN for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 268: Lun Group
If volumes in the LUN group are used for the Storage Cluster function, "Enable" is displayed. When no volumes are used for the Storage Cluster function, "Disable" is displayed. This item is displayed only when "Enable" is selected for the Storage Cluster function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 269: Lun Group Detail
• Volume No. The volume number, which is allocated to the LUN, is displayed. • Name The volume name is displayed. • Type The volume type is displayed. Standard ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 270 The UID is an identifier (storage system name) to specify a volume from the open system server. A "-" (hyphen) is displayed for the Deduplication/Compression System Volume. This item is displayed only when the controller firmware version V10L4x or later is used. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 271: Host Response
A host response which is being used on host, host group, or host affinity. Inactive A host response which is not being used on host, host group, or host affinity. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 272: Ca Reset Group
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of member ports of each CA reset group is displayed. For the ETERNUS DX8700 S3/DX8900 S3 CE#x CM#y CA#z Port#w For the other models CM#y CA#z Port#w ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 273: Host-Lu Qos
The Host-LU QoS list shows the association between "Host", "CA Port", and "LUN Group", bandwidth limit (performance limits), and performance information. • The ETERNUS DX60 S3 does not support this function. • When using ETERNUS Web GUI, schedule settings for QoS parameters and displaying scheduled QoS parameters are not available.
Page 274 Click the [LUN Group : LU QoS Group] link to display a bandwidth limit on each LUN. Refer to "5.7.2 LUN Group : LU QoS Group Detail" (page 280) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 275: Host-Lu Qos Performance Information
The host group name, to which the selected host belongs, is displayed. If all of the hosts are to be connected, "All" is displayed. If the host does not belong to a host group, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 276 If the ETERNUS CLI command ("set mapping") is used for LUN mapping, a "-" (hyphen) is displayed as "LUN Group". If a LUN QoS group number has not been configured, a "- " (hyphen) is displayed as "LU QoS Group". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 277 When no iSCSI host with the host affinity setting is connected • When no IP address for an iSCSI host with the host affinity setting is logged in • When the start time is "0" ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 278 "Overflow" is displayed. The average delay time per command from when performance monitoring is started until performance monitoring is ended (or performance information is displayed) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 279 "Overflow" is displayed. The average delay time per command from when performance monitoring is started until performance monitoring is ended (or performance information is displayed) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 280: Lun Group : Lu Qos Group Detail
• Bandwidth Limit The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not been configured (the bandwidth has not been limited), "Unlimited" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 281: Host Qos (Basic)
The bandwidth limit of the FC/FCoE hosts that are registered in the ETERNUS DX/AF is displayed. This function displays all the hosts that are registered in the ETERNUS DX/AF regardless of whether the hosts belong to host groups or not. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 282: Iscsi Host Qos
The maximum performance of the iSCSI host is displayed in IOPS (throughput value). If the bandwidth limit has not been configured (the bandwidth has not been limited), "Unlimited" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 283: Sas Host Qos
The maximum performance of the SAS host is displayed in IOPS (throughput value). If the bandwidth limit has not been configured (the bandwidth has not been limited), "Unlimited" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 284: Port Qos (Basic)
This function displays the performance information of each port. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 285 When the start time is "0", "-" is displayed for "Start Time" and "Stop / Collect Time". If performance monitoring is restarted during an active performance monitoring session, the performance information that is already obtained is deleted and the collection of performance information starts again. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 286: Iscsi Port Qos
This function displays the performance information of each port. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 287 Refer to "Performance Monitoring" (page 285) for details. • Throughput Refer to "Performance Monitoring" (page 285) for details. • Delay Time Refer to "Performance Monitoring" (page 285) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 288: Sas Port Qos
(the bandwidth has not been limited), "Unlimited" is displayed. • Performance Monitoring Refer to "Performance Monitoring" (page 285) for details. • IOPS Refer to "Performance Monitoring" (page 285) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 289: Fcoe Port Qos
This function displays the bandwidth limit and the performance information of the FCoE ports that are registered in the ETERNUS DX. The ETERNUS DX60 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support this function. • The ports that are registered by the ETERNUS DX are displayed regardless of whether the ports belong to CA port groups or not.
Page 290: Lu Qos Group
"Host affinity setting" is to specify association between "Host", "CA Port" and "LUN Group". Active The LU QoS group is assigned to a LUN group. Inactive The LU QoS group is not assigned to a LUN group. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 291: Nas
This function displays a list of shared folders that are used in a NAS environment. This function is displayed in a Unified Storage environment. • The ETERNUS DX60 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support this function. •...
Page 292 A process that is being performed for the shared folder is displayed. If the NAS data is being deleted, "Clearing Data" is displayed. If no process is being performed, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 293 A list of CIFS Allowed Hosts is displayed. • CIFS Denied Hosts A list of CIFS Denied Hosts is displayed. • NFS Allowed Hosts A list of NFS Allowed Hosts is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 294 If "Everyone" is selected for the CIFS access permission type, the authority is set with the same conditions as when "Read/Write" or "Read Only" is set to all groups in the ETERNUS DX. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 295: Nas Interface
The VLAN ID of the target port is displayed. If the VLAN ID is not specified, a "-" (hyphen) is displayed. • Port The location information of the port with the NAS interface setting is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 296: Environment Settings
In this case, the setting item names are displayed for the Active Directory authentication server and the LDAP authentication server, but all contents are blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 297 Chapter 5 Connectivity Status 5.8 NAS ■ When an Active Directory authentication server or an LDAP authentication server is used ■ When a local user authentication is used (Add Local User) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 298 If the authentication server is not specified, the field is blank. • Domain Administrator The administrator name of the Active Directory authentication server is displayed. If the authentication server is not specified, the field is blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 299 If multiple secondary groups exist, all factors are separated with a "," (comma) and displayed. If no secondary group name exists, a "-" (hyphen) is displayed. If the local user is not registered in the ETERNUS DX, the field is blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 300 "BUILTIN groups" are groups that are included in the ETERNUS DX as standard. If local users belong to these groups, the backup software "Arcserve Backup" can be used to back up or restore files by using the ETERNUS DX as a backup device. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 301: Quota Management
The volume number of the quota setting target volume is displayed. • Volume Name The name of the quota setting target volume is displayed. • Type The quota target type is displayed. User Group Share ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 302 For the used rate, the result of the division is rounded up to two decimal places. If the used rate is larger than "0" but smaller than or equal to "1", "1 %" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 303 If not specified, "Not Specified" is displayed. If the warning value cannot be obtained, a "-" (hyphen) is displayed. Limit The file count limit value is displayed. If not specified, "Not Specified" is displayed. If the limit value cannot be obtained, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 304: Meta Cache Distribution
Distribution" in "ETERNUS Web GUI User's Guide (Settings)" for details. • Automatic meta cache distribution can be disabled. Refer to "Disable Automatic Meta Cache Distribution" in "ETERNUS Web GUI User's Guide (Settings)" for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 305 • Initial Location The location of the meta cache when the NAS volume was created is displayed. When the distribution information cannot be obtained, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 306: Chapter 6 Raid Group Status
Detailed information of the RAID groups can be displayed from the following screens: • RAID Group Detail (Basic) • RAID Group Detail (Volume Layout) • RAID Group Detail (Drives) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 307: Raid Group (Basic Information)
A RAID group that belongs to a Flexible Tier Pool (FTRP) A RAID group that is registered as an REC Disk Buffer Extreme Cache Pool A RAID group that is registered as an Extreme Cache Pool ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 308 Rebuild, copyback, redundant copy, or RAID group recovery is being performed. Expanding Expansion of the RAID group by LDE is being performed. Formatting Formatting of the RAID group is being performed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 309 When the minimum free space of the RAID group is not used for filtering, specify "0MB". Process Select which current process for the RAID group is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 310: Tuning
A RAID group that belongs to an FTRP A RAID group that is registered as an REC Disk Buffer Extreme Cache Pool A RAID group that is registered as an Extreme Cache Pool ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 311 RAID group is SSD or SSD SED, a "-" (hyphen) is displayed. When logged in with a user account that has a default "Monitor" role, this item is not displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 312 When not using the RAID group name for filtering, leave this item blank. Status Select the RAID group status that is to be displayed. RAID Level Select the RAID level that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 313: Eco-Mode Schedule (Raid Group)
RAID group status. • Usage The usage of the RAID group is displayed. Standard A RAID group that is used for creating "Standard", "SDV", or "SDPV" type volumes ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 314 The drive motors are starting up. Idle The drive motors are stopped. In the Stop Process The drive motors are being stopped. Power off The drive power is being turned off. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 315 Input the Eco-mode schedule that is to be displayed. Eco-mode Schedule When not using the Eco-mode schedule name for filtering, leave this item blank. Eco-mode Action Select the Eco-mode action that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 316: Sed Key Group
This function displays the key group settings for the RAID groups that are configured with SEDs. The key group combines all of the RAID groups that use the same SED authentication key. The ETERNUS DX60 S3 does not support this function. •...
Page 317 When not using the RAID group name for filtering, leave this item blank. Status Select the RAID group status that is to be displayed. RAID Level Select the RAID level that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 318: Raid Group Detail (Basic)
This item is displayed only when the RAID level is "High Reliability (RAID6-FR)". (3D+2P)x2+1HS (4D+2P)x2+1HS (6D+2P)x2+1HS (9D+2P)x2+1HS (12D+2P)x2+1HS (5D+2P)x4+1HS (13D+2P)x2+1HS (8D+2P)x3+1HS (4D+2P)x5+1HS (3D+2P)x6+1HS D: Data drives, P: Parity drives, HS: Hot Spares ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 319 High-speed rebuilding when one drive fails in the Fast Recovery RAID group. • CE Drive#yy (for the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F) • DE#xx Drive#yy (xx: DE number, yy: Drive number) •...
Page 320 The number of logical blocks that are assigned to a drive for each stripe when configuring a stripe volume in a RAID group. Normally, it is 64KB. 64 KB 128 KB 256 KB 512 KB 1024 KB ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 321: Raid Group Detail (Volume Layout)
Volume Status The volume status is displayed. Refer to "A.2 Volume Status" (page 406) for detailed information of volume status. • Volume Type The volume type is displayed. Standard SDPV ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 322: Raid Group Detail (Drives)
3.5" Nearline 3.5-inch Nearline SAS disk 3.5" Nearline AF 3.5-inch Nearline SAS disk (Advanced Format supported) 2.5" SSD-M 2.5-inch SSD-M (12 Gbit/s) (*1) 3.5" SSD-M 3.5-inch SSD-M (12 Gbit/s) (*1) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 323 A drive that is used for user data or an unused drives Global Hot Spare A drive that is registered as a Global Hot Spare Dedicated Hot Spare A drive that is registered as a Dedicated Hot Spare ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 324: Chapter 7 Thin Provisioning Pool Status
• Flexible Tier Pool Detail (Volume) • Flexible Tier Sub Pool Detail (Basic) • Flexible Tier Sub Pool Detail (RAID Group) • Flexible Tier Sub Pool Detail (RAID Group Detail) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 325: Thin Provisioning Pools
To check the threshold for monitoring the used capacity of a TPP, refer to "7.1.5 Threshold (Thin Provisioning Pool)" (page 334). • To check the Eco-mode settings of a TPP, refer to "7.1.6 Eco-mode Schedule (Thin Provisioning Pool)" (page 337). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 326 TPP usage does not exceed the "Attention" threshold. Attention TPP usage exceeds the "Attention" threshold but does not exceed the "Warning" threshold. Warning TPP usage exceeds the "Warning" threshold. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 327 7.1 Thin Provisioning Pools • Encryption The TPP encryption status is displayed. For the ETERNUS DX60 S3, this item is not displayed. The TPP that is encrypted by CM. "-" (hyphen) The TPP that is not encrypted. The TPP that is encrypted by SED.
Page 328: Thin Provisioning Pool Detail (Basic)
RAID Level The level of RAID group that configures the TPP is displayed. High Performance (RAID1+0) High Capacity (RAID5) High Reliability (RAID6) High Reliability (RAID6-FR) Mirroring (RAID1) Striping (RAID0) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 329 The TPP physical capacity "xxx", which is converted based on the TPP attention threshold, and the threshold (yy%) are displayed. When the attention threshold is omitted, a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 330 7.1 Thin Provisioning Pools • Encryption The TPP encryption status is displayed. For the ETERNUS DX60 S3, this item is not displayed. The TPP that is encrypted by CM. "-" (hyphen) The TPP that is not encrypted. The TPP that is encrypted by SED.
Page 331 This item is displayed only when Deduplication/Compression for the ETERNUS DX/AF is enabled. A "-" (hyphen) is displayed in the following conditions: Deduplication/Compression for TPP is "Disable" The DEDUP_SYS Volumes cannot be accessed ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 332: Thin Provisioning Pool Detail (Raid Group)
• Used Capacity The used capacity of the RAID groups is displayed. "Used Capacity" indicates the total for the physically allocated capacities of the TPVs in the RAID group. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 333: Thin Provisioning Pool Detail (Volume)
The volumes that are used for the NAS. System The volumes that are used for management information. Refer to "Usage Details" (page 228) "4.11 Volume Detail (Basic)" (page 223) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 334: Threshold (Thin Provisioning Pool)
User’s Guide (Settings)" for details. • To change the threshold of a TPP, follow the procedure that is provided in "Modify Threshold Thin Provisioning Pool" in "ETERNUS Web GUI User’s Guide (Settings)". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 335 RAID Level The level of RAID group that configures the TPP is displayed. High Performance (RAID1+0) High Capacity (RAID5) High Reliability (RAID6) High Reliability (RAID6-FR) Mirroring (RAID1) Striping (RAID0) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 336 When not using the TPP name for filtering, leave this item blank. Drive Type Select the drive type that is to be displayed. RAID Level Select the RAID level that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 337: Eco-Mode Schedule (Thin Provisioning Pool)
"7.1.2 Thin Provisioning Pool Detail (Basic)" (page 328). • Name The TPP name is displayed. Click this item to display the screen shown in "7.1.2 Thin Provisioning Pool Detail (Basic)" (page 328). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 338 The Eco-mode schedule name that is assigned to the TPP is displayed. If the Eco-mode is controlled with Storage Foundation Software ETERNUS SF, "External" is displayed. When no Eco-mode schedule has been assigned, the field is blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 339 Select the RAID level that is to be displayed. Eco-mode Schedule Select the Eco-mode schedule that is to be displayed. Select the Eco-mode action that is to be displayed. Eco-mode Action ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 340: Flexible Tier Pools
7.2 Flexible Tier Pools Flexible Tier Pools The Flexible Tier Pools category provides the setting information for Flexible Tier Pools. The ETERNUS DX60 S3 does not support the Flexible Tier Pool related functions. 7.2.1 Flexible Tier Pool (Basic Information) This function shows the list of Flexible Tier Pools (FTRPs).
Page 341 The total capacity of FTRP is displayed. • Used Capacity The used capacity of the FTRP is displayed. "Used Capacity" indicates the total for the physically allocated capacities of the FTVs in the FTRP. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 342 Shrinking is a function that deletes specific RAID groups in the FTRP to reduce the physical capacity of the FTRP. If the shrinking is not being performed, a "-" (hyphen) is displayed. Executing The FTRP capacity is being reduced. Error Reducing the FTRP capacity failed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 343: Flexible Tier Pool Detail (Basic)
FTRP usage does not exceed the "Attention" threshold. Attention FTRP usage exceeds the "Attention" threshold but does not exceed the "Warning" threshold. Warning FTRP usage exceeds the "Warning" threshold. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 344 The remaining size of the unformatted volume is displayed. To display the latest size, refresh the screen. This item is not displayed when the process is other than "Formatting". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 345 Shrinking is a function that deletes specific RAID groups in the FTRP to reduce the physical capacity of the FTRP. If the shrinking is not being performed, a "-" (hyphen) is displayed. Executing The FTRP capacity is being reduced. Error Reducing the FTRP capacity failed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 346: Flexible Tier Pool Detail (Flexible Tier Sub Pool)
SAS disks Nearline Nearline SAS disks SSDs (*1) Online SED Online SEDs Nearline SED Nearline SEDs SSD SED SSD SEDs "SSD" is displayed regardless of the actual SSD type (SSD-M/SSD-L/SSD). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 347 Shrinking is a function that deletes specific RAID groups in the FTRP to reduce the physical capacity of the FTRP. If the shrinking is not being performed, a "-" (hyphen) is displayed. Executing The FTRP capacity is being reduced. Error Reducing the FTRP capacity failed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 348: Flexible Tier Pool Detail (Volume)
FTSP Priority The FTSP number, to which a volume is assigned on a priority basis in the FTRP, is displayed. When the setting is omitted, "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 349: Flexible Tier Sub Pool Detail (Basic)
The following items are displayed in the Main area: • Status The FTSP status is displayed. Refer to "A.4 Thin Provisioning Pool Status" (page 409) for detailed information of FTSP status. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 350 Shrinking is a function that deletes specific RAID groups in the FTRP to reduce the physical capacity of the FTRP. If the shrinking is not being performed, a "-" (hyphen) is displayed. Executing The FTRP capacity is being reduced. Error Reducing the FTRP capacity failed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 351: Flexible Tier Sub Pool Detail (Raid Group)
• Used Capacity The used capacity of the RAID groups is displayed. "Used Capacity" indicates the total for the physically allocated capacities of the FTVs in the RAID group. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 352: Flexible Tier Sub Pool Detail (Raid Group Detail)
"A.3 RAID Group Status" (page 407) for details. • RAID Level The RAID level is displayed. High Performance (RAID1+0) High Capacity (RAID5) High Reliability (RAID6) High Reliability (RAID6-FR) Mirroring (RAID1) Striping (RAID0) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 353 The drive motors are starting up. Idle The drive motors are stopped. In the Stop Process The drive motors are being stopped. Power Off The drive power is being turned off. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 354 This item is displayed only when the RAID level is "High Reliability (RAID6-FR)". High-speed rebuilding when one drive fails in the Fast Recovery RAID group. • CE Drive#yy (for the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F) • DE#xx Drive#yy (xx: DE number, yy: Drive number) •...
Page 355: Settings (Thin Provisioning)
The maximum pool capacity is the maximum total capacity for TPPs and FTRPs that can be created in the ETERNUS DX/AF. This item is displayed only when "Enable" is selected for the Thin Provisioning function. ETERNUS DX60 S3 32.00 TB, 64.00 TB, 128.00 TB ETERNUS DX100 S3/DX200 S3 32.00 TB, 64.00 TB, 128.00, 256.00 TB...
Page 356 Total Physical Capacity The total physical capacity [PB/TB/GB/MB] of the TPPs in the ETERNUS DX/AF is displayed. This item is displayed only when "Enable" is selected for the Thin Provisioning function. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 357: Chapter 8 Advanced Copy Status
REC Disk Buffer Detailed information of the Advanced Copy functions can be displayed from the following screens: • Advanced Copy (Property) • Advanced Copy (Extent information) • Copy Path Detail ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 358: Advanced Copy (Basic Information)
The "Session Count" is a total of copy sessions in all the statuses including " Reserved". Click the [Session Count] link to display the list of sessions for each type. ETERNUS DX60 S3 0 - 1024 ETERNUS DX100 S3 0 - 1024 (2048) (*1)
Page 359 Reserved". Click the [Session Count] link to display the list of sessions. An XCOPY session is created when the Full Copy function of VMware vStorage APIs for Array Integration (VAAI) is used. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 360 At least one copy session is not in the normal state. ● Virtual Volume Sessions Information For the ETERNUS DX60 S3, this session information is not displayed. • Session Count The number of Virtual Volume sessions that are currently running is displayed.
Page 361: Advanced Copy (All Local Sessions)
The copy session type is displayed using an abbreviation. For Equivalent Copy: EC For One Point Copy: OPC For QuickOPC: QOPC For SnapOPC: SOPC For SnapOPC+: SOPC+ For Monitor: MON ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 362 When "Status" is " Active", the backup time when the copy started is displayed. • When "Status" is " Error Suspend", the time when the error occurred is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 363 Copy session requested by the copy management software (via LAN). Copy session requested by ETERNUS Web GUI. Copy session requested by ETERNUS CLI. SMI-S Copy session requested by SMI-S. Unknown Other than the above clients. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 364 The registration status of the Advanced Copy license when the copy session is started is displayed. Regular The copy session is started with a paid license or a free license (for the ETERNUS DX60 S3/DX100 S3/ DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F).
Page 365: Opc
"0" and then the differential data size from the time when recopy started is displayed. When tracking stops, the modified data size is changed to "0". If the status is " Reserved", a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 366: Snapopc
SDP, a "-" (hyphen) is displayed. Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 367: Snapopc
SDP, a "-" (hyphen) is displayed. Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 368: Monitor
8.2 Advanced Copy (All Local Sessions) 8.2.6 Monitor This function displays detailed information for Monitor sessions. Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 369: Advanced Copy (All Remote Sessions)
Advanced Copy (All Remote Sessions) This function displays the status for remote copy sessions. The ETERNUS DX60 S3 does not support the remote copy sessions. Remote Copy Sessions Information is displayed only when the Advanced Copy function license has been reg- istered, and when using an ETERNUS DX/AF model that supports REC.
Page 370 Session from the local storage system (copy source) to the remote storage system (copy destination) From Remote/To Local Session from the remote storage system (copy source) to the local storage system (copy destination) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 371 The copy session is started with a paid license. Trial The copy session is started with a trial license. Copy sessions that use a trial license are deleted automatically after the expiration of the trial license. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 372 Input the remote Box ID of the copy session that is to be displayed. Remote Box ID When not using the remote BOX ID for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 373: Rec
Chapter 8 Advanced Copy Status 8.3 Advanced Copy (All Remote Sessions) 8.3.1 This function displays detailed information for REC sessions. Refer to "8.3 Advanced Copy (All Remote Sessions)" (page 369) for display items. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 374: Odx Sessions
The copy session status is displayed. Active Operating normally Reserve Session ID reserved Error Suspend Copy canceled due to an error Unknown A status other than the ones listed above ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 375 Select the copy session status that is to be displayed. Input the session ID of the copy session that is to be displayed. Session ID When not using the session ID for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 376: Xcopy Sessions
The error code is displayed when an error occurs. If the status is " Reserved", a "-" (hyphen) is displayed. Refer to "Appendix B Error Code" (page 414) for details. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 377 Select the copy session status that is to be displayed. Input the session ID of the copy session that is to be displayed. Session ID When not using the session ID for filtering, leave this item blank. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 378: Virtual Volume Sessions
This function displays the status for the Virtual Volume session. Virtual Volume sessions are created by VMware vSphere 6.0. The ETERNUS DX60 S3 does not support the Virtual Volume function. The following items are displayed in the Main area: •...
Page 379 The size of copy that has been completed is displayed. If the status is " Reserved", a "-" (hyphen) is displayed. • Total Data Size The total copy size is displayed. If the status is " Reserved", a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 380 When not using the session ID for filtering, leave this item blank. Type Select the type of the copy session that is to be displayed. Status Select the copy session status that is to be displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 381: Settings (Advanced Copy)
The free license is registered. Up to eight local copy sessions can be created as an Advanced Copy. This item is only displayed for the local copy functions of an ETERNUS DX60 S3/DX100 S3/DX200 S3, an ETER- NUS AF250, and an ETERNUS DX200F.
Page 382 High Priority Middle Priority Low Priority Very Low Priority • ODX Buffer Volume The registration status of the ODX Buffer volume is displayed. Registered Not Registered ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 383: Snap Data Pool
This function is displayed only when the Advanced Copy function license has been registered or when the Unified Storage function is enabled. • Because the ETERNUS DX60 S3 does not support the encryption function, display items that follow "Total Capacity" are displayed without the "Encrypted/Unencrypted" table heading. ●...
Page 384 Used Copy Capacity The total capacity of the SDPE that is allocated for an encrypted SDV where a capacity shortage caused by SnapOPC or SnapOPC+ has occurred is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 385: Copy Path
Storage System • Advanced Copy Path Status • The ETERNUS DX60 S3 does not support this function. • After creating the copy paths, make sure to check the copy path status with this function. • This function is displayed only when the Advanced Copy function license or the Storage Cluster function license has been registered, and when using an ETERNUS DX/AF model that supports REC.
Page 386 The recommended multiplicity that is calculated by the [Measure Round Trip Time] result (*2). The round trip time is not measured by the [Measure Round Trip Time] function (*2). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 387: Rec Buffer
Copying via REC Buffer stores multiple REC session I/Os in the REC Buffer for a certain period of time, and copies in blocks. The ETERNUS DX60 S3 does not support this function. This function is displayed only when the Advanced Copy function license has been registered, and when using an ETERNUS DX/AF model that supports REC.
Page 388 "Unused", a "-" (hyphen) is displayed. The REC Buffer is duplicated by two CMs to prevent data loss when the ETERNUS DX/AF fails or when maintenance is performed. Normal Duplication of the REC Buffer was successful. Recovering Duplication of the REC Buffer failed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 389 This item is available when a user with the "Advanced Copy Management" policy is logged on an ETERNUS DX/AF with a controller firmware version V10L4x or later. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 390 When the usage is "Send", the unused capacity of the REC Disk Buffer, which is assigned to the REC Buffer, is displayed. A "-" (hyphen) is displayed when the REC Disk Buffer is not assigned or when the usage is "Receive" or "Unused". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 391: Rec Disk Buffer
REC Disk Buffer This function displays the existing REC Disk Buffers in the ETERNUS DX/AF. • The ETERNUS DX60 S3 does not support this function. • Drives are not monitored for bad sectors when the drives configure the REC Disk Buffer.
Page 392 When not using the REC Disk Buffer name for filtering, leave this item blank. Select the REC Disk Buffer status that is to be displayed. Status When not using the REC Disk Buffer status for filtering, select "All" (all REC Disk Buffers). ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 393: Advanced Copy (Property)
Read Only at Equivalency When the "Phase" is "Equivalent", only read access to the copy destination volume is allowed No Read/Write No read/write access to the copy destination volume is allowed ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 394 When the "Direction" is "From Local/To Remote" The copy source volume name is displayed. When the "Direction" is "From Remote/To Local" The "Remote Box ID / Copy source volume number" is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 395 In this mode, copy automatically resumes when the copy path is recovered from error status. Manual Recovery In this mode, copy does not automatically resume when the copy path is recovered from error status. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 396 Reserved", or if the "Remain Time" cannot be obtained, a "-" (hyphen) is displayed. Refer to "8.3 Advanced Copy (All Remote Sessions)" (page 369) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 397 The copy destination volume name is displayed. If the "Status" is " Reserved", a "-" (hyphen) is displayed. Refer to "8.4 ODX Sessions" (page 374) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 398 The copy destination volume name is displayed. If the "Status" is " Reserved", a "-" (hyphen) is displayed. Refer to "8.5 XCOPY Sessions" (page 376) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 399 "-" (hyphen) is displayed. If the copy session type is not "Snapshot" or "Fastclone", this item is not dis- played. Refer to "8.6 Virtual Volume Sessions" (page 378) for the display items that are not described in this section. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 400: Advanced Copy (Extent Information)
• Destination LBA The copy destination start LBA of copy with range specification is displayed. • Copy Extent Size The data amount for copy with range specification is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 401: Copy Path Detail
When the local storage system and the selected remote storage system are connected by remote connec- tion, the link speed is displayed. If the "Connection Type" is "Direct", a "-" (hyphen) is displayed. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 402 "IPv6 Address Notation" (page 253) for details. • Bandwidth Limit The bandwidth limit for sending data from the local storage system to the path is displayed. Unlimited 1 - 65535 Mbit/s ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 403 The error occurs in the switch or switch settings. Suspected Spot (I) The error occurs in the FC-RA port or iSCSI-RA port on the local storage system. Suspected Spot (M) The error occurs in the memory. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 404: Appendix A Status List
The ETERNUS DX/AF is in the failed status. (Red) "Not Ready" is a status where an abnormality is detected at a power-off, and I/O access from the host cannot be received. (Red) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 405: Storage System General Status (Detail)
"Not Ready", is displayed. The ETERNUS DX/AF is in failed status. I/O from the Subsystem Down host cannot be received normally. (Red) A status other than the ones listed above. Unknown (Red) ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 406: Volume Status
The volume is broken. Broken Data in the volume is lost. Reading or writing of data cannot be performed. Data Lost A status other than the ones listed above. Unknown ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 407: Raid Group Status
One of the drives that configures the RAID group has failed. The RAID group uses the Fast Recovery hot spare. Partially Exposed (Fast) This status is displayed only when the RAID level is "High Reliability (RAID6-FR)". ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 408 The RAID group is broken. The RAID group uses the Fast Recovery hot spare. Broken (Fast) This status is displayed only when the RAID level is "High Reliability (RAID6-FR)". A status other than the ones listed above. Unknown ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 409: Thin Provisioning Pool Status
The TPP is broken. Broken Data in the TPP is lost. Reading or writing of data cannot be performed. Data Lost A status other than the ones listed above. Unknown ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 410: Component Status
The component is under maintenance. Maintenance The component requires preventive maintenance. Warning An error has occurred in the component. Error A status other than the ones listed above. Unknown ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 411: Drive Status
An error involving RAID group failure has occurred in the drive. Failed Usable An error has occurred in the drive. Broken A status other than the ones listed above. Unknown ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 412: Key Status
Updating of the key stopped due to an error • SEDs are maintained while a network error occurs when the security level is "Low" "Self-signed SSL certificate" or "SSL server certificate" ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 413: Key Server Status
An error due to a failure other than key acquisition failure is detected. Communication to the key server could not be performed due to an internal Internal Error failure of the ETERNUS DX/AF. "Self-signed SSL certificate" or "SSL server certificate" ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 414 A copy path error occurs. Data is stored in the REC Disk Buffer. 0xBF This error is displayed only when the "Type" is "REC". Other than above An error other than the ones listed above occurs. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 415: Appendix C Setting Procedures For Replacing Hbas
Before starting the operation, check the following information. • The WWN of the current HBA • The host name corresponds to the WWN of the current HBA • The WWN of the new HBA ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 416: Overview Of The Procedure
The following procedure is an example when a FC interface is used between the host and the ETERNUS DX/AF. The same procedure can basically be used even when the interface type is iSCSI or FCoE. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 417: Checking The Connection Status Between The Host And The Eternus Dx/Af
■ When the host affinity settings are not used (conventional LUN mapping is used)  "Inactive" is displayed as the status. In this case, settings after replacing the HBA are not required. The replacement of the HBA is complete. End of procedure ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 418: Required Storage System Settings After Hba Replacement (When Host Affinity Settings Are Used)
Change the WWN of the HBA that is to be replaced to the WWN of the new HBA. Procedure Input "User ID" and "Password" in the browser and log in to ETERNUS Web GUI. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 419 Change the WWN of the HBA that is to be replaced to the WWN of the new HBA, and click the [Modify] button. Do not change the "Name".  A confirmation screen appears. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 420 After recovering the multipath configuration, confirm that the ETERNUS DX/AF can be accessed from the host. If the WWN is changed by the [Modify FC/FCoE Host] function, changing the host affinity setting is not required. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 421: Required Storage System Settings After Hba Replacement (When Host Affinity Settings Are Not Used)
(When Host Affinity Settings are not Used) When the host affinity function is not used (conventional LUN mapping is used), changing the storage system settings after replacing an HBA is not required. ETERNUS Web GUI User’s Guide (Operation) Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0...
Page 422 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.

This manual is also suitable for:

Eternus dx600 s3 Eternus dx8100 s3 Eternus dx100 s3 Eternus dx8700 s3 Eternus dx200 s3 Eternus dx8900 s3 ... Show all

Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 Screen Operations

Chapter 2 System Status

Chapter 3 Component Status

Chapter 4 Volume Status

Chapter 5 Connectivity Status

Chapter 6 RAID Group Status

Chapter 7 Thin Provisioning Pool Status

Chapter 8 Advanced Copy Status

Appendix A Status List

Appendix B Error Code

Appendix C Setting Procedures for Replacing Hbas

Quick Links

Related Manuals for Fujitsu ETERNUS DX60 S3

Summary of Contents for Fujitsu ETERNUS DX60 S3