Delete Lun-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete lun-group

delete lun-group

This command deletes the specified LUN groups, or releases a definition from the specified LUN group.
■
Syntax
delete lun-group {-lg-number
■ Parameter
-lg-number
or
-lg-name
-lun
■ Example(s)
The following example only deletes LUN group #1:
CLI> delete lun-group
The following example deletes LUN groups #1 and #2:
CLI> delete lun-group
The following example only releases the definition of LUN #1 associated with the LUN group named
"LUN001":
CLI> delete lun-group
The following example only releases the definitions of LUN #1 and #2 associated with the LUN group named
"LUN001":
CLI> delete lun-group
lg_numbers
This parameter specifies the LUN group identifies to be deleted. One or more parameters
can be specified at the same time. For details, refer to
By specifying the "-lun" parameter, one or more definitions included in the LUN group can
be deleted. In this case, the LUN group is not deleted.
lg_numbers
LUN group number
lg_names
LUN group name
Optional. This parameter specifies the LUNs that will be removed from the LUN group
definitions. Two or more parameters can be specified by separating them with a comma (,),
a hyphen (-), or both. If omitted, the specified LUN groups are deleted.
Example: -lun 1,2 -lun 1-3 -lun 1-3,5
luns
Host LUN
-lg-number 1
-lg-number 1,2
-lg-name LUN001 -lun 1
-lg-name LUN001 -lun 1,2
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
lg_names
| -lg-name } [-lun
"1.2.12 LUN Group Syntax" (page
331
luns
]
P2X0-1210-05ENZ0
28).