Fujitsu Eternus DX100 S3 User Manual page 45

Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
The following example shows the information that is displayed when all of the enclosures are specified:
CLI> show enclosure-status -type all
Controller Enclosure Information
Location
Intake Temp
Exhaust Temp
Controller Enclosure Status
Controller Module Status/Status Code
CM#0 [Normal
CM#1 [Normal
Power Supply Unit Status/Status Code
PSU#0 [Normal
PSU#1 [Normal
Disk Status
CE-Disk#0
CE-Disk#2
CE-Disk#4
CE-Disk#6
CE-Disk#8
CE-Disk#10
Drive Enclosure #1 Information
Location
Intake Temp
Exhaust Temp
Drive Enclosure #1 Status
I/O Module Status/Status Code
IOM#0 [Normal
IOM#1 [Normal
Power Supply Unit Status/Status Code
PSU#0 [Normal
PSU#1 [Normal
Disk Status
DE#1-Disk#0
DE#1-Disk#2
DE#1-Disk#4
DE#1-Disk#6
DE#1-Disk#8
DE#1-Disk#10 [Available(Predictive Failure)]
Status Error Code
Normal 0x0000
Normal 0x0000
/ 0xE001]
/ 0xE001]
/ 0xE001]
/ 0xE001]
[Rebuild/Copyback
[Available
[Available
[Available(Predictive Failure)]
[Present
[Present
Status Error Code
Normal 0x0000
Normal 0x0000
/ 0xE001]
/ 0xE001]
/ 0xE001]
/ 0xE001]
[Available
[Available
[Rebuild/Copyback
[Available
[Available
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Sensor 1 / Sensor 2
25 (C) / 25 (C)
25 (C) / 25 (C)
] CE-Disk#1 [Rebuild/Copyback
] CE-Disk#3 [Broken
] CE-Disk#5 [Available(Predictive Failure)]
CE-Disk#7 [Present
] CE-Disk#9 [Present
] CE-Disk#11 [Spare
Sensor 1 / Sensor 2
25 (C) / 25 (C)
- / -
] DE#1-Disk#1 [Available
] DE#1-Disk#3 [Rebuild/Copyback
] DE#1-Disk#5 [Available
] DE#1-Disk#7 [Available(Predictive Failure)]
] DE#1-Disk#9 [Available
DE#1-Disk#11 [Broken
45
]
]
]
]
]
]
]
]
]
]
P2X0-1210-05ENZ0