Show Raid-Group-Progress - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show raid-group-progress

show raid-group-progress

This command displays the progress of the Rebuild/Copyback process and the expansion process of all RAID
groups (Logical Device Expansion). Individual RAID groups can also be specified.
■ Syntax
show raid-group-progress [-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Output
RAID Group RAID group identifiers
Status
Rebuild/Copyback
rg_numbers
Optional. This parameter specifies RAID group identifiers. If the RAID group identifier is
omitted, a progress list of all the RAID groups is displayed. For details, refer to
Group Syntax" (page 25).
rg_numbers
RAID group number
rg_names
RAID group name
No. RAID group number
Name RAID group name
RAID group status
Information on the recovery progress
Progress Progress (0 – 100%)
Estimated time left
Estimated remaining recovery time
-
calculating
30days or more
X day Y h Z min
Y Z
h min
Z
min
Less than 1min
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_names
| -rg-name
Formatting is not performed or is complete.
The remaining time is being calculated.
The remaining time is 30 days or more.
The remaining time is less than 30 days but 1 day or more.
The remaining time is less than 1 day but 1 hour or more.
The remaining time is less than 1 hour but 1 minute or more.
The remaining time is less than 1 minute.
73
]
"1.2.9 RAID
P2X0-1210-05ENZ0