Fujitsu Eternus DX100 S3 User Manual page 607

Chapter 5 System Settings and Display
5.3 System Settings > set ntp
-secondary-server
-secondary-port
■ Example(s)
The following example sets the NTP configuration. The primary NTP server is specified as "ntpserver.com".
The MNT port is specified as the Ethernet port for the primary NTP functions.
CLI> set ntp -primary-function enable -primary-server ntpserver.com -port maintenance
The following example sets the NTP configuration. The secondary NTP server is specified as IP address
"10.1.1.100". The RMT port is specified as the Ethernet port for secondary NTP functions.
CLI> set ntp -function enable -secondary-server 10.1.1.100 -secondary-port remote
The following example disables NTP:
CLI> set ntp -function disable
Optional. This parameter specifies the address of the secondary NTP server. Up to 64 characters
can be specified. The server name format is IPv4 standard notation (a base 256 "d.d.d.d"
string), IPv6 address format, or a fully qualified domain name. The types of IPv6 addresses that
can be specified are global addresses (including 6to4 addresses), link local addresses, and
unique local addresses. If omitted, the existing setting is not changed.
Example: -secondary-server 192.168.1.20
Example: -secondary-server fd80::abd0:223:ad
Example: -secondary-server foo.bar
server_address
Secondary NTP server address
Optional. This parameter specifies the Ethernet port to connect to the secondary NTP server. If
omitted, the existing setting is not changed.
maintenance
MNT port
remote RMT port
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
607
P2X0-1210-05ENZ0