Fujitsu Eternus DX100 S3 User Manual page 266

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-sas-address
-host-group-number
or
-host-group-name
-new-host-group-name
■ Example(s)
The following example registers the alias "HBA1" for the HBA with SAS address "500605b000b5f344":
CLI> create host-sas-address -address 500605b000b5f344 -name HBA1
The following example registers the alias "HBA1" for the HBA with SAS address "500605b000b5f344". The
registered host alias is added to host group "HG1":
CLI> create host-sas-address -address 500605b000b5f344 -name HBA1 -host-group-name HG1
The following example registers the alias "HBA1" for the HBA with SAS address "500605b000b5f344". The
registered host alias is added to host group "HG2", which is created in host response #1:
CLI> create host-sas-address -address 500605b000b5f344 -name HBA1 -host-response-number 1 -new-host-group-
name HG2
Optional. This parameter specifies the host group identifier. The "-host-group-number" or the
"-host-group-name" parameter must be specified. Only one host group can be specified at the
same time. For details, refer to
host_group_number
Host group number
host_group_name
Host group name
Optional. This parameter specifies a new host group name. Only one host group can be
specified at the same time. For details, refer to
new_host_group_name
New host group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.17 Host Group Syntax" (page
"1.2.17 Host Group Syntax" (page
266
30).
30).
P2X0-1210-05ENZ0