Delete Snmp-User - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > delete snmp-user

delete snmp-user

This command deletes one or more SNMP user settings. This command is not available when the SNMP user
setting that is to be deleted is already used for an SNMP community or an SNMP trap.
■ Syntax
delete snmp-user {-user
■ Parameter
-user
or
-number
■ Example(s)
The following example deletes the SNMP user named "FooVar":
CLI> delete snmp-user -user FooVar
The following example deletes SNMP users number 2 and 4:
CLI> show snmp-user
No. User name
1 "FooVar1"
2 "FooVax"
3 "BUZZ"
4 "snmpuser1"
CLI> delete snmp-user -number 2,4
CLI> show snmp-user
No. User name
1 "FooVar1"
3 "BUZZ"
user_name
| -number
This parameter specifies the user name or user number to delete SNMP user entry. For the
"-number" parameter, one or more users can be specified by separating each user number with
a comma (,) or a hyphen (-).
When "-number all" is specified, all of the users are deleted. The user number can be confirmed
by using the "show snmp-user" command.
Example:
-name Foo
-number 1
-number 2,3
-number 1-4
user_name
SNMP user name
numbers
SNMP user number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
numbers
}
Authentication Encryption
MD5 enable
SHA disable
disable disable
MD5 enable
Authentication Encryption
MD5 enable
disable disable
529
MIB-view
"xview4"
"xview5"
"view11"
"view13"
MIB-view
"xview4"
"view11"
P2X0-1210-05ENZ0