Fujitsu Eternus DX100 S3 User Manual page 327

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create lun-group
■ Example(s)
The following example creates the LUN group named "LUN001". It will associate volume #8 with LUN #10:
CLI> create lun-group -name LUN001 -volume-number 8 -lun 10
The following example creates the LUN group named "LUN001". It will associate consecutive volumes #0-#10
with LUNs #0 – #10:
CLI> create lun-group -name LUN001 -volume-number 0-10 -lun 0-10
327
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0