Delete Eco-Schedule - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > delete eco-schedule

delete eco-schedule

This command deletes an Eco-mode schedule(s) or a single Eco-mode schedule event. One or more Eco-mode
schedules can be deleted at the same time. Only one Eco-mode schedule event can be deleted at the same
time.
■ Syntax
delete eco-schedule {-schedule-number
[-event-number {1|2|3|4|5|6|7|8}]
■
Parameter
-schedule-number
or
-schedule-name
-event-number
■
Example(s)
The following example will delete the Eco-mode schedule named "SC002":
CLI> delete eco-schedule -schedule-name SC002
The following example will delete Eco-mode schedule event #2 in the Eco-mode schedule named "SC001":
CLI> delete eco-schedule -schedule-name SC001 -event-number 2
The following example will delete both the Eco-mode schedules named "SC002" and "SC003" at the same
time:
CLI> delete eco-schedule -schedule-name SC002,SC003
This parameter specifies the Eco-mode schedule identifier. One or more parameters can be
specified. However, if one or more parameters are specified, the "-event-number" parameter
cannot be specified. For details, refer to
schedule_numbers
Schedule number
schedule_names
Schedule name
Optional. This parameter specifies the Eco-mode schedule event number to be deleted. The
Eco-mode schedule event number is a value from 1 to 8 and can be displayed by using the
"show eco-schedule" command. Only one event number can be specified. If the event-number
is omitted, the Eco-mode schedule is deleted.
1 – 8 Schedule event number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
schedule_numbers | -schedule-name
"1.2.14 Eco-mode Schedule Syntax" (page
99
schedule_names }
29).
P2X0-1210-05ENZ0