Fujitsu Eternus DX100 S3 User Manual page 98

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > set eco-schedule
-event-from Optional. This parameter specifies that the Eco-mode schedule will start at a specific time. The
-event-to
■ Example(s)
The following example adds Eco-mode schedule event #2 in the Eco-mode schedule named "SC001":
CLI> set eco-schedule -schedule-name SC001 -event-number 2 -event-type every-day -event-from 0600 -event-to
1800
The following example changes the Eco-mode schedule name. The new Eco-mode schedule name is
"SC002_NEW":
CLI> set eco-schedule -schedule-name SC001 -name SC002_NEW
mon Monday
tue Tuesday
wed Wednesday
thu Thursday
fri Friday
sat Saturday
sun Sunday
format is "hhmm". "hh" is the starting hour (00 – 23) and "mm" is the starting minute (00 or
30). If omitted, the existing setting is not changed.
A disk motor will power ON at the time specified by this parameter.
Optional. This parameter specifies that the Eco-mode schedule will end at a specific time. The
format is "hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00 or 30).
If omitted, the existing setting is not changed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
98
P2X0-1210-05ENZ0