Show Eco-Thin-Pro-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > show eco-thin-pro-pool

show eco-thin-pro-pool

This command displays the list of Eco-mode schedules that are associated with Thin Provisioning Pools.
■
Syntax
show eco-thin-pro-pool
■ Parameter
No parameters.
■ Output
Thin Pro
Disk attribute
reliability
Status
ECO Schedule
Motor Status
Control Status
■ Example(s)
The following example displays a list of all the Thin Provisioning Pools that have an Eco-mode schedule
associated with them:
CLI> show eco-thin-pro-pool
Thin Pro
No. Name
--- ---------------- --------- ------- ------------------ --------------- --- ---------------- ------------------- -------
2 TPP#0
Thin Provisioning Pool identifiers
No. Thin Provisioning Pool number
Name Thin Provisioning Pool name
Drive attribute that composes the Thin Provisioning Pool (Online/Nearline)
Reliability of the Thin Provisioning Pool (High/Middle/None)
Thin Provisioning Pool status
Eco-mode schedule
Action Eco-mode schedule action. This indicates whether the Eco-mode schedule has
been associated.
No. Eco-mode schedule number (In the case of a schedule by a cooperative software,
[128] is displayed.)
Name Eco-mode schedule name (In the case of a schedule by a cooperative software,
[External] is displayed.)
Current status of drive motors
Control status by a control command
Disk RAID Status
attribute Level
Nearline RAID1 Available
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ECO Schedule
Action No. Name
Drive power off 0 SC001
193
Motor Control
Status Status
Active [OFF]
P2X0-1210-05ENZ0