Fujitsu Eternus DX100 S3 User Manual page 354

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-response
-dev-id-type
-product-id
-rsv-rsp-status
-lun-mapping
-lun-capacity
-vendor-unique-sense
Optional. This parameter specifies the Vital Product Data (VPD) information type to respond to
the host. The VPD information contains the device information (including the Vendor ID, the
product ID for each model, and the volume number) of the volume. Type 1 and Type 3 indicate
the data format. If this parameter is omitted, the existing setting remains unchanged.
type1 type1
type1-3 type1 + type3
type3 type3 (default)
Optional. This parameter specifies which product ID is responded. If this parameter is omitted,
the existing setting remains unchanged.
default The default product ID (ETERNUS DX S3 series or ETERNUS DX200F) is responded.
eternus-dx-s2
The product ID for the ETERNUS DX S2 series is responded.
Optional. This parameter specifies the Reservation Conflict response corresponding to the Test
Unit Ready. If this parameter is omitted, the existing setting remains unchanged.
enable This function is enabled.
disable This function is disabled. (default)
Optional. This parameter specifies if the notification is sent when the LUN mapping is
changed. If this parameter is omitted, the existing setting remains unchanged.
enable Notified (default)
disable Not notified
Optional. This parameter specifies if a notification is sent when the LUN capacity is changed. If
this parameter is omitted, the existing setting remains unchanged.
enable Notified (default)
disable Not notified
Optional. This parameter specifies whether an asynchronous sense, which is a vendor unique
sense code that does not link with host I/Os, is notified. If this parameter is omitted, the exist-
ing setting remains unchanged.
enable Notified
disable Not notified (default)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
354
P2X0-1210-05ENZ0