Show Thin-Provisioning - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > show thin-provisioning

show thin-provisioning

This command displays information on whether the Thin Provisioning function is enabled and displays the
maximum capacity of the pools that can be created in the ETERNUS DX.
■ Syntax
show thin-provisioning
■
Parameter
No parameters.
■ Output
Thin provisioning
Maximum pool capacity
■ Example(s)
The following example displays the case when the Thin Provisioning function is enabled:
CLI> show thin-provisioning
Thin provisioning
Maximum pool capacity(TB) [128]
The following example displays the case when the Thin Provisioning function is disabled:
CLI> show thin-provisioning
Thin provisioning
Maximum pool capacity(TB) [-]
Indicates whether the Thin Provisioning function is used (Enable or Disable)
Maximum pool capacity (TB) (Example: 128)
("-" appears when the Thin Provisioning function is disabled.)
[Enable]
[Disable]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
176
P2X0-1210-05ENZ0