Fujitsu Eternus DX100 S3 User Manual page 297

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > release host-affinity
■ Example(s)
The following example releases all of the host affinity settings that have been made on host interface CA#0
Port #0 on CM#1:
CLI> release host-affinity
The following example only releases the host affinity settings of the host named "H1" on CA#0 Port #1 on
CM#0:
CLI> release host-affinity
The following example releases the host affinity settings of the host named "H1" on host interface CA#1
Ports #0 and #1 on CM#0:
CLI> release host-affinity
The following example respectively releases the host affinity settings of the host named "H1" and "H2" on
CA#0 ports #0 and #1 on CM#1:
CLI> release host-affinity
The following example respectively releases the host affinity settings of host #1 and #2 on the host interface
CA#0 Port#0 on CM#0:
CLI> release host-affinity
-port 100
-port 001 -host-name H1
-port 010,011 -host-name H1
-port 100,101 -host-name H1,H2
-port 000 -host-number 1,2
297
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0