Show Ca-Reset-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show ca-reset-group

show ca-reset-group

This command displays a list of the host interface ports that are in each of the reset groups. The number of
reset groups is dependent on the number of host interface ports available.
■ Syntax
show ca-reset-group
■ Parameter
No parameters.
■
Output
Port
Reset Group Reset group
■
Example(s)
The following example shows each reset group configured with four host interface ports:
CLI> show ca-reset-group
Reset Group
Reset Group
Reset Group
Reset Group
The following example shows a reset group that is configured with 16 host interface ports:
CLI> show ca-reset-group
Reset Group
Host interface port #0 in the reset group
Port
000 001 002 003
010 011 012 013
100 101 102 103
110 111 112 113
Port
000 001 002 003 010 011 012 013 100 101
102 103 110 111 112 113
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
364
P2X0-1210-05ENZ0