Fujitsu Eternus DX100 S3 User Manual page 699

Chapter 6 Information Settings and Display
6.3 Maintenance Information > show port-error
DE#1 FEM#1 EXP#1
The status for CM#x EXP Port#0 PHY#2, CM#x EXP Port#1 PHY#2, CM#x EXP Port#0 PHY#3, and CM#x EXP Port#1 PHY#3 is "N/A" when the DX100 S3/DX200
S3 is used.
The status for CM#x IOC#y Port#z PHY#2 and CM#x IOC#y Port#z PHY#3 is "N/A" when the DX100 S3/DX200 S3 is used.
CM#x EXP Port#4, CM#x EXP Port#5, CM#x EXP Port#6, and CM#x EXP Port#7 only appear when the ETERNUS DX600 S3 is used.
CM#x IOC#1 Port#z only appears when the ETERNUS DX600 S3 is used.
DE#x IOM#y Port#2 and DE#x IOM#y Port#3 only appear when a High Density Drive Enclosure is installed.
DE#x FEM#y EXP#z ports only appear when a High Density Drive Enclosure is installed.
DE#x FEM#1 appear regardless of the number of controllers.
Port PHY#0 Link Down
PHY#1 Link Down
PHY#2 Link Down
PHY#3 Link Down
PHY#4 Link Up
PHY#5 Link Up
PHY#6 Link Up
PHY#7 Link Up
PHY#8 Link Up
PHY#9 Link Up
PHY#10 Link Up
PHY#11 Link Up
699
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
- -
- -
- -
- -
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
- -
- -
- -
- -
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
P2X0-1210-05ENZ0