Fujitsu Eternus DX100 S3 User Manual page 432

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management
3
Associate REC buffer with REC disk buffer.
To associate an REC buffer with an REC disk buffer, use the "set rec-disk-buffer" command.
• To release the REC disk buffer from the REC buffer, use the "release rec-disk-buffer" command. This
can be confirmed by using the "show rec-disk-buffer" command.
• To delete an REC disk buffer, use the "delete rec-disk-buffer" command.
The following figure shows the process involved in setting the REC disk buffer through CLI:
REC buffer
partition 2
set rec-disk-buffer
(Association)
release rec-disk-buffer
(Release)
create rec-disk-buffer
Use four drives
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
A volume is created at the same time
that the REC disk buffer is created.
Volume
REC Disk Buffer
delete rec-disk-buffer
"RECDB0001"
400 401 423
500 501 523
432
End of procedure
format rec-disk-buffer
P2X0-1210-05ENZ0