Fujitsu Eternus DX100 S3 User Manual page 279

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-iscsi-name
■ Example(s)
The following example changes the host named "HBA21", assigning it the new IP address "10.1.1.2" (the IP
address format can also be changed to a different format, such as from IPv4 to IPv6):
CLI> set host-iscsi-name -host-name HBA21 -ip 10.1.1.2
The following example changes the host named "HBA21", assigning it host response number "2":
CLI> set host-iscsi-name -host-name HBA21 -host-response-number 2
The following example changes the host response definition of all the hosts with consecutively numbered
identifiers #1-#10 at the same time:
CLI> set host-iscsi-name -host-number 1-10 -host-response-number 5
The following example changes the host named "HBA21". The new alias name is "HBA22" and the number of
commands that can be accepted at the same time is 80.
CLI> set host-iscsi-name -host-name HBA21 -name HBA22 -cmdsn-count 80
The following example changes the format of the 0 (almighty) IP address for a host to IPv6 (IP address for
HBA21 = 0.0.0.0):
CLI> set host-iscsi-name -host-name HBA21 -ip-version ipv6
279
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0