Fujitsu Eternus DX100 S3 User Manual page 865

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
ED1C2
ED1C3
ED1C4
ED1C5
ED1C6
ED1C7
ED1C8
ED1C9
ED1CA
ED1CB
ED1CC
ED1CD
ED1CE
ED1CF
ED1D0
ED1D1
ED1D2
ED1D3
ED1E0
ED1E1
An error occurred in the CA.
An error occurred in the CA.
An error occurred in the BRT.
An error occurred in the BRT.
An error occurred in the SVC.
An error occurred in the SVC.
An error occurred in the RSP.
An error occurred in the RSP.
An error occurred in the FRT.
An error occurred in the FRT.
An error occurred in the PBC.
An error occurred in the PBC.
An error occurred in the battery.
An error occurred in the battery.
An error occurred in the DE.
An error occurred in the DE.
An error occurred in the DE path.
An error occurred in the DE path.
An error occurred in the user drive.
An error occurred in the user drive.
An error occurred in the system drive.
An error occurred in the system drive.
An error occurred in the Flash-ROM.
An error occurred in the Flash-ROM.
An error occurred in the FE Expander.
An error occurred in the FE Expander.
An error occurred in the BE Expander.
An error occurred in the BE Expander.
An error occurred in the EXP.
An error occurred in the EXP.
An error occurred in the drive path.
An error occurred in the drive path.
An error occurred in the drive.
An error occurred in the drive.
An error occurred in communication with the NAS engine.
An error occurred in communication with the NAS engine.
Power-on has not been performed yet or power-off is being performed.
Power-on has not been performed yet or power-off is being performed. Wait for a while and try again.
Zero is specified for the module ID in the transmitter.
Zero is specified for the module ID in the transmitter. Wait for a while and try again.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
865
P2X0-1210-05ENZ0