Mapping (When Host Affinity Mode Is Not Used) - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management
3.5.4

Mapping (When Host Affinity Mode is Not Used)

This section explains the commands for mapping when Host Affinity Mode is disabled. When Host Affinity
Mode is not enabled, mapping is the definition of the associated volumes with the host LUNs that applies for
all the connected host servers.
298
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0