Show Eco-Raid-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show eco-raid-group

show eco-raid-group

This command displays a list of the RAID groups that have an Eco-mode schedule associated with them.
■
Syntax
show eco-raid-group
■ Parameter
No parameters.
■ Output
RAID Group RAID group identifiers
Level
Status
Assigned CM
Capacity (MB)
ECO Schedule
Motor Status
Control Status
No. RAID group number
Name RAID group name
RAID level
RAID group status
Controller module to be assigned to the target RAID group
RAID group capacity
Eco-mode schedule identifiers
Action Eco-mode schedule action. It means whether the Eco-mode schedule is
associated.
No. Eco-mode schedule number (In the case of a schedule by a cooperative software,
"128" is displayed.)
Name Eco-mode schedule name (In the case of a schedule by a cooperative software,
"External" is displayed.)
Current status of the disk motors
Control status by a control command
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
100
P2X0-1210-05ENZ0