Chapter 6 Information Settings and Display
6.3 Maintenance Information > clear disk-error
clear disk-error
This command clears the disk error information. It is possible to clear the error information of specific disks.
■
Syntax
clear disk-error [-disks
■
Parameter
-disks
■
Example(s)
The following example clears the error information for all the disks:
CLI>clear disks-error
The following example clears only the error information for disk#1 in the CE:
CLI>clear disks-error -disks 001
disks
]
Optional. This parameter specifies the disks to clear the error information from. One or more
disks can be specified at the same time. For details, refer to
this parameter is omitted, the error information for all the disks is cleared.
disks
Drive
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
695
"1.2.4 Drive Syntax" (page
23). If
P2X0-1210-05ENZ0