Displaying Status Via Eternus Cli; Event Notification; Table 12 General Status Of Eternus Cli - Fujitsu ETERNUS DX60 S3 Operation Manual

Hybrid storage systems
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

3.
Storage System Monitoring

Displaying Status via ETERNUS CLI

Status
(red)
(orange)
(yellow)
For details, refer to "Configuration Guide (Web GUI)".
Displaying Status via ETERNUS CLI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked by sending
the status display command via ETERNUS CLI.
CLI> show status
Summary Status [Normal]
CLI> show status
Summary Status [Error]
CLI> show status
Summary Status [Warning]
The general status of the ETERNUS DX indicates whether an error status component or a warning status compo-
nent exists in the storage system.

Table 12 General Status of ETERNUS CLI

Status
Empty
Normal
Pinned Data
Unused
Warning
Maintenance
Error
Loop Down
Not Ready
Subsystem Down
Change Assigned CM

Event Notification

By setting event notification, if an error (event) occurs in the ETERNUS DX, the event information is notified.
The methods that can be used to notify an event are "e-mail", "SNMP Trap", "Syslog", "remote support", and "host
sense".
For the procedure on setting event notification, refer to "Configuration Guide (Basic)".
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Description
The ETERNUS DX is in error state.
The ETERNUS DX is under maintenance.
The ETERNUS DX is in warning state.
Description
An undefined or uninstalled component exists in the ETERNUS DX.
The ETERNUS DX is in a normal state.
Pinned data exists in the ETERNUS DX.
An undefined component is installed in the ETERNUS DX.
The ETERNUS DX contains a component that requires preventive maintenance.
The ETERNUS DX is under maintenance.
An error has occurred in a component that is installed in the ETERNUS DX.
The ETERNUS DX is in the BackEnd Down state.
An abnormality is detected and access from the host cannot be received.
The ETERNUS DX cannot be used.
CM hot expansion recovery is required.
44
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx60 s4

Table of Contents