Show Volume-Qos - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volume-qos

show volume-qos

This command displays the performance setting for the Volume QoS.
■ Syntax
show volume-qos [-volume-number
■ Parameter
-volume-number
or
-volume-name
or
-all
■ Output
Volume
Bandwidth Limit
volume_number
Optional. This parameter specifies the volume identifier for the target volume to display the
QoS performance. Multiple volumes can be specified. For details, refer to
Syntax" (page 26). If the "-all" parameter is specified, the QoS performance setting is displayed
for all volumes including volumes with a bandwidth limit of "0" (no upper limit). If this
parameter is omitted, the QoS performance setting is displayed for volumes that have a
bandwidth limit other than "0" (no upper limit).
volume_number
Volume number
volume_name
Volume name
-all All Volumes including volumes with a bandwidth limit of "0" (no upper limit).
Volume identifiers
No. Volume number
Name Volume name
QoS performance bandwidth limit (upper limit performance value) configured in the volume
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_name
| -volume-name
144
| -all]
"1.2.10 Volume
P2X0-1210-05ENZ0