Show Host-Response - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-response

show host-response

This command displays the host response settings. If the host response name or number is omitted, a
summary of all host responses is displayed. If the host response name or number is included as a parameter,
then the details of the specified host response parameters are displayed.
■ Syntax
show host-response
[-host-response-number
■
Parameter
-host-response-number
or
-host-response-name
■ Output
When a parameter is specified, details of the specified host response is displayed.
Host Response No.
Host Response Name
LUN
LUN Addressing
LUN Expand Mode
ALUA
Asymmetric / Symmetric Logical Unit Access
host_response_numbers
Optional. This parameter specifies the host response identifier and detailed information of the
host response is displayed. One or more parameters can be specified. If omitted, a summary
list is displayed. For details, refer to
host_response_numbers
Host response number
host_response_names
Host response name
Host response number
Host response name
LUN setting information category
LUN addressing format
Indicates whether the range of the LUN mapping reference is expanded to 4096.
(This information is not used when the Flat Space Addressing mode is used for LUN
addressing)
ALUA setting information category
Access type for volumes
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -host-response-name
"1.2.13 Host Response Syntax" (page
348
host_response_names
]
28).
P2X0-1210-05ENZ0