Set Nas-Dns - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.5 Network Settings > set nas-dns

set nas-dns

This command configures the DNS server.
■
Syntax
set nas-dns [-primary-ip {
[-primary-ipv6 {
■ Parameter
-primary-ip
-secondary-ip
ip_address
| ""}] [-secondary-ip {
ipv6_address
| ""}] [-secondary-ipv6 {
Optional. This parameter specifies the primary IPv4 address of the DNS server. To delete a
setting, specify a null character (""). If omitted, this parameter is not changed.
• The primary DNS server cannot be set with the same IP address as the secondary DNS
server.
• If the secondary IPv4 addresses have been specified, the primary IPv4 addresses cannot be
deleted.
ip_address
Primary IPv4 address
"" The primary IPv4 address is deleted.
Optional. This parameter specifies the secondary IPv4 address of the DNS server. To delete a
setting, specify a null character (""). If omitted, this parameter is not changed.
• The secondary DNS server cannot be set with the same IP address as the primary DNS
server.
• If the primary IPv4 addresses have not been specified, the secondary IPv4 addresses cannot
be set.
ip_address
Secondary IPv4 address
"" The secondary IPv4 address is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ip_address
| ""}]
ipv6_address
| ""}]
776
P2X0-1210-05ENZ0