Appendix C Firmware Version Support For Commands - Fujitsu Eternus DX100 S3 User Manual

Appendix C
Firmware Version Support for Commands
This appendix provides a list of firmware versions that support CLI commands. An "x" mark indicates that the
command is supported by this firmware or later.
Some parameters of a command may be supported by a firmware version that is different from the firmware
version that supports the command.
Table C.1
Storage System Status
show status
show enclosure-status
show fru-ce
show fru-de
show disks
show hardware-information
RAID Group Management
show raid-groups
show raid-group-progress
create raid-group
set raid-group
delete raid-group
expand raid-group
set global-spare
release global-spare
set dedicated-spare
release dedicated-spare
show eco-mode
set eco-mode
show eco-schedule
create eco-schedule
set eco-schedule
delete eco-schedule
show eco-raid-group
set eco-raid-group
release eco-raid-group
List of firmware version support for commands
Command name
ETERNUS CLI User's Guide
V10L10 V10L13
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
912
Copyright 2014 FUJITSU LIMITED
Firmware Version
V10L16 V10L17 V10L20
P2X0-1210-05ENZ0