Show Host-Port-Mode - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show host-port-mode

show host-port-mode

This command displays operation mode that is set to each host interface port.
■
Syntax
show host-port-mode
■ Parameter
No parameters.
■ Output
x y
CM# CA# Port#
Port Mode
■
Example(s)
The following example displays operation mode that is set to all the host interface ports on a system:
CLI> show host-port-mode
CM#0 CA#0 Port#0
CM#0 CA#0 Port#1
CM#0 CA#1 Port#0
CM#0 CA#1 Port#1
CM#1 CA#0 Port#0
CM#1 CA#0 Port#1
CM#1 CA#1 Port#0
CM#1 CA#1 Port#1
z
Host interface port number
Operation mode for a host interface port
Port Mode
RA
CA
CA
CA
RA
RA
NAS-CA
NAS-CA
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
433
P2X0-1210-05ENZ0