Fujitsu Eternus DX100 S3 User Manual page 646

Chapter 5 System Settings and Display
5.3 System Settings > create sed-key-group
-master-server-id
-slave-server-id
■ Example(s)
The following example sets up the key group:
CLI> create sed-key-group -name key-group1 -machine-group-name machine_group1 -security-level high
-recovery-mode auto -period 6 -master-server-id 1 -slave-server-id 2
Optional. This parameter specifies the key server ID for the master server. 1 or 2 can be speci-
fied. When the master server is not used, specify a null character ("") or omit this parameter.
Use the same setting as the master server that is set in the key server.
master_server_id
Key server ID for the master server (1 or 2)
"" The key server ID is omitted.
Optional. This parameter specifies the key server ID for the slave server. 1 or 2 can be specified.
When the slave server is not used, specify a null character (""). If omitted, the slave server is
not set. Use the same setting as the slave server that is set in the key server.
master_server_id
Key server ID for the slave server (1 or 2)
"" The key server ID is omitted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
646
P2X0-1210-05ENZ0