Fujitsu Eternus DX100 S3 User Manual page 602

Chapter 5 System Settings and Display
5.3 System Settings > set date
-dst
-from
20
Abu Dhabi
21
Islamabad, Karachi
22
New Delhi
23
Dhaka
24
Bangkok, Jakarta
25
Hong Kong, Manila, Singapore
26
Beijing, Taipei, Kuala Lumpur, Perth
27
Tokyo, Osaka, Kyoto, Fukuoka, Sapporo
28
Seoul
29
Adelaide
30
Guam, Sydney, Melbourne
31
Solomon Islands, New Caledonia
32
Wellington, Auckland, Fiji
Optional. This parameter specifies whether the daylight saving time is enabled or not. If
omitted, the existing setting is not changed.
enable DST is enabled.
disable DST is disabled.
• When "enable" is specified, both the starting and the ending information must be specified.
• When "disable" is specified, the starting nor the ending information cannot be specified.
Optional. This parameter specifies when DST (daylight saving time) starts, and must be
specified when enabling DST. If omitted, the existing setting is not changed.
There are two formats; "MMDDhh" and "MM,
{1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat},hh".
MMDDhh
"MM" is the starting month number (01 – 12), "DD" is the starting day number
(01 – 31), and "hh" is the starting hour in 24-hour time (00 – 23).
MM
, {1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat},
"MM" is the starting month number (01 – 12). Both "{1st|2nd|3rd|4th|last}" and
"{sun|mon|tue|wed|thu|fri|sat}" are pairs, and means the starting day and the
starting week. "hh" is the starting hour in 24-hour time (00 – 23).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
602
+4:00
+5:00
+5:30
+6:00
+7:00
+8:00
+8:00
+9:00
+9:00
+9:30
+10:00
+11:00
+12:00
hh
P2X0-1210-05ENZ0