Show Lun-Groups - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lun-groups

show lun-groups

This command displays a list of existing LUN groups. If no parameters are specified, a summary list of all the
existing LUN groups is displayed. If LUN groups are specified, the details of the associated volumes and LUNs
are displayed.
The LUN Overlap volume information indicates whether the same volume is defined for multiple LUN groups
or whether a volume is mapped to a LUN.
■ Syntax
show lun-groups [-lg-number
■
Parameter
-lg-number
or
-lg-name
■ Output
When the parameter is omitted, a summary of all the existing LUN groups is displayed.
LUN Group
LUN Overlap Volumes
When the parameter is specified, the details of the specified LUN group are displayed.
LUN Group No.
LUN Group Name
LUN
lg_numbers
Optional. This parameter specifies the LUN group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing LUN
groups will be displayed.
lg_numbers
LUN group number
lg_names
LUN group name
LUN group identifiers
No. LUN group number
Name LUN group name
Indicates whether the same volume identifier is defined between LUN groups or that a
LUN mapping is set for the volume. If the same definitions exist, "Yes" is displayed for
the target LUN groups. Otherwise, "No" is displayed.
LUN group number
LUN group name
Logical unit number (LUN)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
lg_names
| -lg-name ]
324
P2X0-1210-05ENZ0